MikroTik

Hi,

b4 I applied and filter rules I was able to use winbox as well as telnet from my local network into my router. After I applied this filter rules I am not able to use winbox nor telnet from my local network pc into my router. I have also setup maq. This is what I applied

/ip firewall rule input
add connection-state=invalid action=drop \
comment="Drop invalid connection packets"
add connection-state=established \
comment="Allow established connections"
add connection-state=related \
comment="Allow related connections"
add protocol=udp comment="Allow UDP connections"
add protocol=icmp comment="Allow ICMP messages"
add src-addr=68.57.*.*/22 \
comment="Allow access from 'trusted' network 68.57.*.*/22"
add action=drop log=yes \
comment="Reject and log everything else"

The 68.57.*.*/22 is the providers network. My local interface Ip is
192.168.111.*/24

Do I have to use my local network Ip instaed of my isp network?

Any help will be appreciated

ThX

Have you tried to insert ...
...before the last drop all rule?

Yes I tried inserting the local ip but I was unable to telnet or winbox. I even changed the last rule to the one you suggested and still did not work. I don't know what to do next. Thank you for the advice pedja

try to put a range of you IP's

Thank you guys. I reset all my router config and started from scratch. yes you were right pedja I replaced the 68.57.*.* with the 192.168.*.* and that fixed the problem.

ThX