hello all
Posted: Fri Oct 31, 2008 4:15 pm
rb433 and rb433 ah
wt is the right power in POE case and one xr2 ?
is it 18pow or 24hpow ??
wt is the right power in POE case and one xr2 ?
is it 18pow or 24hpow ??
Page 1 of 1
Re: hello all
Posted: Fri Oct 31, 2008 4:24 pm
RouterBOARD 433 PoE 10..28V DC
Re: hello all
Posted: Fri Oct 31, 2008 5:29 pm
24v POE is better and much more stable than the 18v POE especially if you have a long ethernet cable.
Re: hello all
Posted: Sat Nov 01, 2008 12:55 am
thnxRouterBOARD 433 PoE 10..28V DC
18pow = 24v and .8 amp24v POE is better and much more stable than the 18v POE especially if you have a long ethernet cable.
24hpow = 24v and 1.6 amp
which one u mean (24v)
many thnx
Re: hello all
Posted: Sat Nov 01, 2008 1:42 pm
thnxRouterBOARD 433 PoE 10..28V DC
18pow = 24v and .8 amp24v POE is better and much more stable than the 18v POE especially if you have a long ethernet cable.
24hpow = 24v and 1.6 amp
which one u mean (24v)
many thnx
24hpow = 24v and 1.6 amp
Re: hello all
Posted: Sun Nov 02, 2008 5:58 pm
MANY thaaaaaaaaaaaaaaaaaaaaaaanxthnxRouterBOARD 433 PoE 10..28V DC
18pow = 24v and .8 amp24v POE is better and much more stable than the 18v POE especially if you have a long ethernet cable.
24hpow = 24v and 1.6 amp
which one u mean (24v)
many thnx
24hpow = 24v and 1.6 amp
thats other thing:
i order this
http://www.quicklinkwireless.com/Itemde ... 18&eq=&Tp=
what is its input volt ?
thnx
Re: hello all
Posted: Mon Nov 03, 2008 12:35 am
any body from north america tell me !!
Re: hello all
Posted: Mon Nov 03, 2008 11:00 pm
heeeeeeeeeeeeeeeeeeey
Re: hello all
Posted: Tue Nov 04, 2008 1:32 pm
Well, as a European guy I'd estimate the input voltage should be 110V at 60 Hz.
But perhaps someone from the US can comment. Although... They all are busy with electing today
But perhaps someone from the US can comment. Although... They all are busy with electing today
Re: hello all
Posted: Tue Nov 04, 2008 1:34 pm
and they should be ... go on, go vote everyone!Well, as a European guy I'd estimate the input voltage should be 110V at 60 Hz.
But perhaps someone from the US can comment. Although... They all are busy with electing today