Problem with Bridge
Posted: Thu Nov 20, 2008 10:09 am
Hello!
I was creating a network setup with multiple pptp connections, also adding a remote network with eoip and pptp. Most of it went fine, however, when eoip interface was created and bridged in the main MT box, the users noticed that one webpage, http://www.inord.lv stopped functioning. Other https webpages open fine.
I stripped down the MT-box setup to the very simple. It is attached to this message. As soon as the local "home" interface is part of the bridge, there is no way to connect to http://www.inord.lv . When home is released from the bridge, the above page opens.
I tried recreate the bridge with WinBox and with console -- no difference. The setup has been tried on a x86 and on RouterBox 450 with RouterOS 3.10, 3.14 and 3.16 -- no difference.
I attach my setup. On RouterBox 450, Interface 1 goes to the internet via dhcp, interface 2 is the local interface with dhcp. User/pass: admin admin
Any suggestions / ideas?
Best regards,
Robert
I was creating a network setup with multiple pptp connections, also adding a remote network with eoip and pptp. Most of it went fine, however, when eoip interface was created and bridged in the main MT box, the users noticed that one webpage, http://www.inord.lv stopped functioning. Other https webpages open fine.
I stripped down the MT-box setup to the very simple. It is attached to this message. As soon as the local "home" interface is part of the bridge, there is no way to connect to http://www.inord.lv . When home is released from the bridge, the above page opens.
I tried recreate the bridge with WinBox and with console -- no difference. The setup has been tried on a x86 and on RouterBox 450 with RouterOS 3.10, 3.14 and 3.16 -- no difference.
I attach my setup. On RouterBox 450, Interface 1 goes to the internet via dhcp, interface 2 is the local interface with dhcp. User/pass: admin admin
Any suggestions / ideas?
Best regards,
Robert