hi; im having strange problem here; i have 3 board as a hotspot systems, a rb333 with l6 license as core; rb433 and rb33 connected to ether 2 and one of my switch ports directly connected to ether3 ; what happens is ; when you restart the devices only the first booted device is accessible; you cant access the other device; even thoug the device is on; there is no traffic flow. there is no problem with ips and routes. i have suspected the virtual aps first disabled them but same problem persists. bdw all boards are running on v3.20

it seems to be a problem with card mode
ap<>station .. ap<>station-wds

draw your config, than we can try to help U