hi it's my first time in the community and am glad am here
i setup a base using the 600 board with the 1watt card on it
and a client with the 433 board with 600mw card on it the distance between
is about a kilometer through a small angle of a building.
initially it was replying in 1-3ms but after about 2month it reply from
the client is about 1000 - 3000ms which is pretty bad.
[please help me out am losing my client.
Re: HELP AM LOSING MY CLIENT!!!!!!!!!!!!!!!!!!!!
try to change your frequency and if possible get another card
Re: HELP AM LOSING MY CLIENT!!!!!!!!!!!!!!!!!!!!
How about the signal, CCQ and traffic?
This response time can indicate high traffic or a low link throughput.
If your problem is the throughput you may need to take a look on your radio cards or
if the problem occour in other channels.
Are you using 1W and 600mW cards for 1Km range link? I think you dont need all this power anyway, in some
circunstances excess of power can generate more problems like link saturation.
cya
This response time can indicate high traffic or a low link throughput.
If your problem is the throughput you may need to take a look on your radio cards or
if the problem occour in other channels.
Are you using 1W and 600mW cards for 1Km range link? I think you dont need all this power anyway, in some
circunstances excess of power can generate more problems like link saturation.
cya