Hi to all, excuse me for my poor english.
I have 25 Users on a AP at 8 to 15 km distance. The AP is situated on 1500mt of moutain with many many Watts of Network Radio and TV.

I have solved interference on ether1 with a unique Rb 433AH with 3 R5H Radios, 1 radio for ptp link (Nstreme) and 2 radio for 2 Sector 90 degree but i think have a small interference on wlan cards.


For example when i make a bandwith test from CPE to AP, sometimes is not stable, i have enable edaptive noise immunity (AP and client mode)

Signals is good, ccq is good, have set to 5 ghz 10 mhz, i have to try to change frequencies. Unfortunately there is' very much noise.

I have installed 3.25 ROS with Wireless test package enabled.

If i enable Nstreme on AP and CPE, i can to solve this problem ?????


Thanks to all.


Tony.

Turn on nstreme and put some aluminum cookie foil between radio cards to elimante interferences.