Hi to all,

I have big problems with frequencies when 2 units RB433/Rb411 are set in AP Bridge and Station Pseudobridge. With some frequencies, the units does not connect.

Example:

Unit 1 RB411 or RB433 - Mode AP Bridge, Frequency 5230
Unit 2 RB411 or RB433 - Mode Station Pseudobridge, same frequency, 5230

These 2 units does not connect. I need to change the AP Bridge frequency to 5240 to permit registration.

If I change Mode to Bridge and I enable WDS Dymanic to all units, with 5230MHz, and other frequencies, like 5205, 5265, 5270, 5275 and some others, the units are working perfectly.

This problem happens on all RB411 and RB433 that I have, with RouterOS 3.22, License 4.x, and with R52-350L Wireless Cards.
This problem is antenna independent.
I've tested also 2 RouterBoard with RouterOS 3.25 without any result.

Anyone have a fix for this?

Thanks and excuse me for my english.

Pasquale

I got a similar problem here...

I'm in Brazil and when I put country set to my country and use channel 5765, 5785, 5805, 5825 units dont connect each other, but with 5760, 5780, 5800 and 5820 they connect perfectly!

To workaround this problem I put disered channels on client scanlist. That works for me, maybe work for you too...


Jorge


RouterOS: 3.23, 3.24 and 3.25 (not tested older versions)