Page 1 of 1
RB 411AH wireless TCP performance
Posted: Mon Jul 06, 2009 1:45 pm
by Ibersystems
Hi,
I think that with 3.25 performance is going better? It's possible?
I leave the 411AH at 680, not 800Mhz.. conntrack connected.
411ah.JPG
Thanks,
Re: RB 411AH wireless TCP performance
Posted: Mon Jul 06, 2009 2:30 pm
by InoX
no configuration, no help.
good day
Re: RB 411AH wireless TCP performance
Posted: Mon Jul 06, 2009 2:40 pm
by Ibersystems
haha,
no help needed.
It's only to say that I have 3.25 intalled now and I arrive this 38 Mbps full duplex in TCP. I think that with 3.13 and others this performance was about 30-33 Mbps in TCP.
Thanks.
Re: RB 411AH wireless TCP performance
Posted: Mon Jul 06, 2009 7:27 pm
by InoX
I have 75mbps with 3.24 one way
Re: RB 411AH wireless TCP performance
Posted: Mon Jul 06, 2009 7:33 pm
by vspace
what are yours hardware config and wireless settings?
seems like a/g in 40mhz channel.... but it's only my suggestion
Re: RB 411AH wireless TCP performance
Posted: Mon Jul 06, 2009 7:54 pm
by Ibersystems
Inox, 75Mbps in TCP?
Vspace, is 5ghz turbo (40MHz) and nstreme.
Re: RB 411AH wireless TCP performance
Posted: Tue Jul 07, 2009 2:34 am
by InoX
yep
Re: RB 411AH wireless TCP performance
Posted: Tue Jul 07, 2009 11:25 am
by Ibersystems
I never see such TCP speed at any RB : /
Re: RB 411AH wireless TCP performance
Posted: Tue Jul 07, 2009 12:48 pm
by InoX
it is between an RB433 and a x86
Re: RB 411AH wireless TCP performance
Posted: Tue Jul 07, 2009 3:37 pm
by Muqatil
And with 3.25 you are using 20 connections instead of 1..
It makes the BTest more reliable with higher throughput than only 1 connection...
Re: RB 411AH wireless TCP performance
Posted: Wed Jul 08, 2009 1:59 am
by InoX
Re: RB 411AH wireless TCP performance
Posted: Wed Jul 08, 2009 10:30 am
by Muqatil
It was refered to Ibersystems' post
Re: RB 411AH wireless TCP performance
Posted: Wed Jul 08, 2009 12:50 pm
by InoX
anyway I don't see the advantages of .n. Everyone is testing with UDP and they get 200mbps but in TCP I see about 80-90mbps. This is not a major improvement...bonding is beter, not cheaper but better.
Re: RB 411AH wireless TCP performance
Posted: Thu Jul 09, 2009 12:22 am
by kabelfrei
hello InoX,
impressive performance. Could you post you config (hardware (cm9?, Antenna?) and RouterOS)
thx,
kabelfrei
Re: RB 411AH wireless TCP performance
Posted: Tue Jul 14, 2009 12:44 pm
by InoX
offset antenna 80cm, -50 signal, CCQ100%, noise -100, SNR 50dB, 3.24.