Page 1 of 1
Intel PCI-Express 1000 82574L without work
Posted: Sat Aug 22, 2009 6:58 pm
by marinpareja
Hello, I have a Intel PCI-Express 10/100/1000 with 82574L chip and it don't work, I have seen the hardware supported and it isn't supported by RouterOS but I have seen to much Intel interface are supported.
In the official web of Intel this driver is open source, Is it possible to do it work? and how?
Thanks
Re: Intel PCI-Express 1000 82574L without work
Posted: Mon Aug 24, 2009 2:57 pm
by Chupaka
82573L works fine %) did you try v3.28? if yes - then make supout.rif and send to
support@mikrotik.com - maybe they can add support of this card in future versions
Re: Intel PCI-Express 1000 82574L without work
Posted: Tue Aug 25, 2009 6:39 pm
by marinpareja
Yes, I have 3.28 version of RouterOS but don't work, I will send a email to mikrotik for future edition, but
How do I do a "supout.rif"?
thanks
Re: Intel PCI-Express 1000 82574L without work
Posted: Tue Aug 25, 2009 6:55 pm
by fewi
From the CLI: "/system sup-output"
Or click "Make supout.rif" in WinBox near the bottom of the buttons on the very left.
Felix
Re: Intel PCI-Express 1000 82574L without work
Posted: Wed Aug 26, 2009 5:09 pm
by marinpareja
Thanks