Hi, I have two RB600 boards just acquired and the problem is auto-reboot every 30-50 secs... (all two boards same problem...).

Routerboot: 2.18
RouterOS: 3.10

I've updated routerboot to 2.19 and routerOS to 3.30, now the boards work fine (no auto reboot) but there is a "problem" with eth ports...

The phisical Eth ports are "shifted" in winbox or terminal box... the real Eth1 are labeled as Eth2 in terminal... Eth2 is labeled as Eth3 and Eth3 is labeled as Eth1.... What's happen?

Tnx

Paolo

Make sure that you use the newest firmware (routerboot version) for the Rb600 as it had a fix for the DDR about six months ago.

Hi netwatcher, tnx for reply...

Can You let me know where I can find last routerboot version? Now I have 2.19...

"for the Rb600 as it had a fix for the DDR about six months ago"

hehehe... strange life... I've purchased a RB600 about 1 year ago and work fine without problems... these two boards purchased about 2 months ago have problems.... bah!

tnx again

Paolo