MikroTik

hello all

my ping increased since i upgraded my mikrotik from 3.28 version to 4.2 version which pinged to one local PC previous. the ping from <1ms become 9 ms. This is caused active simpleque, but the simpleque is not came from PC which i pinged. When i disabled the que the ping is back to normal to <1ms.

Note :
i installed mikrotik on PC based Pentium 4 and i already replaced LAN card, cable, and DOM

regards

hmmm... maybe post your queue, so we can see the reason? =) what statistics does it show?

I allso have problems with ping responce.
Pinging address on the same board takes from 0 to 10ms, no cpu load.

this only 1 simpleque

name="queue1" target-addresses=10.10.10.60/32 dst-address=0.0.0.0/0 interface=all parent=none direction=both
priority=8 queue=default-small/default-small limit-at=0/0 max-limit=2M/2M burst-limit=0/0 burst-threshold=0/0
burst-time=0s/0s total-queue=default-small

and i ping to 10.10.10.62 respond : 0-10ms
but when i disable the queue1 ..ping back to normal : <1ms

the que its limit for 10.10.10.60 ..i ping to 10.10.10.62

note :
- no nat , mangle and filter rules
- statistics just blank / no counter
- cpu load 0-1%
- the result same with ver 3.30 , 4.2 , 4.3
- ver 3.28 works fine

regards

it happens to me too...

since 3.30 and v4.xx

help us mikrotik!