MikroTik

I am working on an application that will let you log into a Mikrotik and manage it as if you were using Winbox. I will update this post as I get more completed to keep you up to date.

The app should support all Mikrotiks from 3.20 to 4.40 as this is what I am testing it with. Unfortunately I do not have the ability nor knowledge to test every possible tool or interface but I have ways of getting ideas on how stuff works.

http://www.youtube.com/watch?v=wyzXoFXgnKA

App Store:
http://itunes.apple.com/us/app/mikroman ... 04767?mt=8

Update 02-24-2010:
I would like to do beta testing soon for interfaces primarily. I would like people to test them on different versions of routeros and let me know what I am missing or if it is displaying invalid data. I can't test it all because well I don't have access to Mikrotiks (for testing on) on all versions from 3.20-4.40. Most of my tests are me adding the interface with default settings and then testing against that. Most of my testing is done in 4.40.

If you want to participate please send me a PM or go to my website (http://www.murderdev.com) and email me with your device UDID. Also if you can give me a good reason why you would be a good beta tester that would be great. I only have so many devices I can register per year.

To do this, connect your device to your computer and launch iTunes. In iTunes, select your device in the ‘Devices’ section and navigate to the Summary tab. Click on the Serial Number label to reveal the Identifier field and the 40 character UDID. Copy the UDID to your clipboard.

Update 02-25-2010
All the interfaces (that I am going to do for the first release) are done. They aren't all tested but I'm fairly sure they are ok. I have finished implementing VirtualAp detection vs WLAN as well as support for Prism VS Atheros cards for Wireless. I think it's pretty badass. I will be doing that beta testing very very soon after I get some stuff cleaned up and organized for a closed release.

Update 08-18-2010
Available in the app store now. Currently very limited but has a lot of info for interface monitoring.

Very good Idea, will it be available in Appstore?
I would suggest something like "iWinbox" or "iROS"
Keep it going, i will PURCHASE it!

Yup it will be available in the App Store.

I was just think this morning how useful an app would be! Keep us posted on your progress!

Need beta testers?

I may need some beta testers actually. I may choose a handful of people and let them have at it for a week or two fix bugs and stuff before I release. I'll let you guys know.

/me want's to test it too

Secure mode? Or otherwise encrypted?

Well its using the API so as secure as that is. It works by sending a message to the mikrotik and then the Mikrotik sends back a hash. That has is combined with the hash of the password and username and sent back to the Mikrotik for authentication. After that I believe the mikrotik will do whatever you ask via the API as long as you have permissions and are on the same IP address. That connection times out over a period of time with no activity I believe.

So to answer your question... No its not using SSL but there is some level of protection.

Apart from that you should always only be able to access the API if you are
a) in the same network (e.g. connected via WLAN)
b) connected over a secure link (e.g. via PPTP VPN)

Whats it take to port an app from the iphone to the Android OS? Just curious as no one in my area uses AT&T, and we are moving our installers to the Moto Droid to use for just about everything. Would be great to have a winbox app!

That's not true dog.
You can access from everywhere if the router you are trying to connect has internet access.

Yes, you could.
What I am saying is that you should configure the firewall so that this is not possible for security reasons.

We use 1000s of these to provide internet to customers and they get dictionary attacked all the time. No one ever gets through but its not really a big deal. They usually attack on the ssh front.

LOL. Impressive. Very good app.

Work on it hard and fast please!

; )

I would like to do beta testing soon for interfaces primarily. I would like people to test them on different versions of routeros and let me know what I am missing or if it is displaying invalid data. I can't test it all because well I don't have access to Mikrotiks (for testing on) on all versions from 3.20-4.40. Most of my tests are me adding the interface with default settings and then testing against that. Most of my testing is done in 4.40.

If you want to participate please send me a PM with your device UDID. Also if you can give me a good reason why you would be a good beta tester that would be great. I only have so many devices I can register per year.

To do this, connect your device to your computer and launch iTunes. In iTunes, select your device in the ‘Devices’ section and navigate to the Summary tab. Click on the Serial Number label to reveal the Identifier field and the 40 character UDID. Copy the UDID to your clipboard.

"You are not authorised to send private messages."

Once again, stuck on the outside looking in...

Thats ok. I added an additional method to contact me. You may go to my website http://www.murderdev.com and contact me that way. I would give out my email but I really don't need anymore spam. That contact page goes directly to my mail box.

Thats ok. I added an additional method to contact me. You may go to my website http://www.murderdev.com and contact me that way. I would give out my email but I really don't need anymore spam. That contact page goes directly to my mail box.

Thanks for adding that!

Email sent...

That's great news. If you need beta tester i'm in. I'm using versions from 2.9.27 to 4.5.

Would like to beta here too...

I have running:
~100 493/493AHs
5 RB1000Us
2 RB600s
3 RB433s
1 450G
6 RouterOS x86 licensed non-routerboard systems

Most running 4.5 some running 3.x (3.11-> 3.30)

can it work on windows mobile phones?

I am sorry but this will only be for iPhones.

All the interfaces (that I am going to do for the first release) are done. They aren't all tested but I'm fairly sure they are ok. I have finished implementing VirtualAp detection vs WLAN as well as support for Prism VS Atheros cards for Wireless. I think it's pretty badass. I will be doing that beta testing very very soon after I get some stuff cleaned up and organized for a closed release.

I am thinking I will be ready to beta test by tonight. I currently have 4 people interested but I would like at least 10 people for the beta test. If you are interested please contact me. Information is in the first post. You do not need an unlocked phone to participate and it should work fine on an iTouch as well as long as you are connected to a wifi network.

I received an email from jsmith and I was unable to reply to him because the email was not valid. If you sent me an email with this address please contact me back with an email that works with your device identifier. Thanks.

I have running:
~100 493/493AHs
5 RB1000Us
2 RB600s
3 RB433s
1 450G

How do you manage those 100 devices?

All I could find in the wiki with regards to this was the "Configuration Management" topic, which dealt with importing/exporting the configuration. This is tedious enough for one device, but I cannot imagine doing that for 100 - at least not manually.

(Slightly OT)

I manage the same about of devices over a PHP+API tool I have written.
I basically only have to enter the wireless MAC-ID and it will create the necessary configuration for me, which I then can import (this takes about 1.5m per device)
After that I can control all devices via my tool

I suspect many here have done the same, some users have over 1000 RBs.

Exactly what dog said really.

If you want to manage them then well individually is how it is going to happen since you are one guy.

If you simple want to configure all of them then creating a script using the API would be your best bet. Make it so you give it all the IP addresses for the devices and then it configures them. Hell you can export that config file you were talking about and use the API to auto import it to all the devices. that is if the API allows import. I haven't tried it.

Ah, I can follow. The wiki page on Configuration Management didn't mention a scenario such as this, but the approach makes sense.

Fully automated configuration management is why I initially posted this feature request. I just wanted to boot a vanilla Debian install so badly so I can just run cfengine on it, which in turn would install & configure all services I expected on the gateway for me (as it's done for ~30 hosts I administer currently).

I'll look into the scripting solution. Thanks for the info!

Let me know if you require any more testers. exciting project.

EDIT : I work at an ISP. We have a number of RB devices that we are testing in different configs.

hotspot access controller, MLppp modem bonding, VPN

Any idea when you will release the first beta????

i am waiting..........

BR

Mauricio

I would like to get the beta also.

Thanks!

I went to your site and emailed the UDID.

I have enough and will release it soon. I have several people though who have not givin' me their identifiers. Directions are in the first post. I need this so that I can compile the app with your iphone or itouch. You must also have OS version 3.0 or greater.

I will be compiling this today with the UDIDs I have and sending out instructions with a link to the App to those who want to participate.

Hamil:
I need your UDID. Please be sure you have an iphone or itouch with OS 3.0 or greater.

To do this, connect your device to your computer and launch iTunes. In iTunes, select your device in the ‘Devices’ section and navigate to the Summary tab. Click on the Serial Number label to reveal the Identifier field and the 40 character UDID. Copy the UDID to your clipboard.

Have you decided on a price point yet for when you release this to the app store?

I have a little. I was thinking making it somewhere around $6.99 USD or $5.99 for original release and then moving it to $9.99 when you can modify settings. What do you guys think?

Sounds reasonable to me.

I have sent out the beta to those who have contacted me with a UDID.

I have sent out the beta to those who have contacted me with a UDID.

My first feedback has been sent to you via e-mail...

BR

The new web winbox by mikrotik presented at the last mum, makes obsolete this kind of applications ?

I haven't seen the new web winbox but at our company we wont let anyone use the web winbox because it breaks our routers somehow by resetting a ton of settings and what not. I don't know much about it though.

I haven't seen the new web winbox but at our company we wont let anyone use the web winbox because it breaks our routers somehow by resetting a ton of settings and what not. I don't know much about it though.

don't mess 'webbox' and 'new http winbox' =) it will have all the functions of WinBox

I dont know the details on it. I was just told i cant use it because it breaks stuff. That said where is info on this new webbox?

in will be in a few weeks, in RouterOS v5 beta =)

yes, webbox "breaks" stuff if you use it at the same time with other configuration interfaces. it makes it's own kind of rules which can override existing rules. if you use Webbox, then use ONLY webbox.

WebFig however is something completely different. It will be the same as using Winbox.

So will Webfig work offline (not connected to the internet)? Will it work on anything prior to RouterOS 5?

Quick question, are you still doing the beta for the iphone? I emailed in my udid number to you from your website and didn't know if you needed more information. Thanks again for taking the time!!!!

I emailed everyone that sent me their UDID. If you did not get an email then I may have not received yours. Go ahead and send it to me again.

I emailed it in just now from your website.

Thanks

Oh yea I already added you to the beta list. I sent you another email on how to use it.

Got it thanks!

So will Webfig work offline (not connected to the internet)? Will it work on anything prior to RouterOS 5?

Of course, it will work just like winbox, you will only need direct connection to the router. The interface will reside on RouterOS.

Not sure yet about backwards compatibiliity.

Oh ok that makes sense then.

I would like a version for java phones.. Maybe you should think about expanding in the future. This could make scanning alot easier

I don't consider 'java phones' an expansion more like a downgrade. all new phones, even very cheap ones, have normal web browser.

Any updated status on this project?

I have been testing this app with a lot of different versions and router types. I have had no complaints or problems. Looking forward to additional infrastructure.

I took a break for a bit and never heard anything from my testers. I will be continuing this project very soon.

I don't consider 'java phones' an expansion more like a downgrade. all new phones, even very cheap ones, have normal web browser.

Then where is my hotspot access through your "improved" web interface? Two of the three sections I require are not available in the new web interface.

BTW, I will let you know how the Java "downgrade" into my BlackBerry is going.

come on, even my 99$ nokia can log into hotspot. all phones with regular webbrowser can work fine in hotspot environment, it's tested because we use it here at mikrotik ourselves

My bad, normis. Maybe I wasn't clear. Where is the hotspot section in your new web-based software? If you will kindly show me a screenshot of the equivalent CLI "/ip hotspot host" and "/ip hotspot active" from your new web-based software. I could not find it in the menu.

Hmm ...

That is what I wanted. It seems I was misunderstood above. Nobody answered, so I wasted a lot of time on something already available.

I would like to see it in the demo, but it apparently it is failing on load. It displays the WebFig, then appears to start downloading stuff. I waited a couple minutes, and it never came up. Linux w/ Firefox V3.5.1

Maybe this is a good day to go surfing instead...

Make sure you have it like this:

http://192.168.88.1/webfig/

not like this

http://192.168.88.1/webfig

(slash)

I have always been clear about beta versions! I will not upgrade to a beta version on equipment that is in commercial use. My test unit is one of my spares. It must remain with a version that is stable.

Here is the first topic on this subject to which I posted.
http://forum.mikrotik.com/viewtopic.php?f=1&t=34863

I am referring to your online demo
http://demo2.mt.lv/webfig/

Yes, Demo2 is very slow to load the initial interface, but it works

No Go! Three attempts on two different OS/browsers. Add IE8 to the fail list. If it takes more than 3 minutes to boot, too slow. AFTER THREE MINUTES, I used Rove Mobile SSH, logged in to my router (including the portknock!), checked "/ip hotspot active" and "/ip hotspot host", and logged out. Your demo still had not finished loading.

I will not take that as a true demo of that interface. There must be something wrong. Can anyone else verify this. I would really like to see this demo!!!

Yes, we can verify. Seems there is a bug that shows on slow connections. We are working on it right now.

Thanks, normis!
Maybe last time I looked at the demo, I just had not waited long enoungh for the rest of the "home page" to load. I do see the hotspot selection on your screenshot very plain. And considering that I was there to find exactly that, I don't see how I missed it. But, as I recall from the one demo download I got to go through, there were not nearly that many selections on the home page. Let me know about the demo.

Clicking on the IP menu reveals it's submenu, just like in Winbox. Maybe you didn't click IP

That is not where a WinBox user would look for that. But I am not a WinBox user. I use the CLI. In writing the Blackberry Java code for the directory structure, I used the same as the CLI, so, by habit, I looked there first.

So you mean to say that this is not a submenu?



Winbox and Webfig are identical, the menu strucure is imported directly, nothing is hand made or sorted in that regard. Menu locations will be the same.

I don't know what to tell you. That is exactly the menu structure I am using, and that is exactly where I expected it when I went there originally. And to find it there at that time (not being too far into the Java code), would have pleased me greatly! ??? Now it just pleases me a lot.

ADD: Then I did good on the Java menu structure. When you login,
<admin@MikroTik>?
Anything in light blue is a menu. Anything else is performed there. Same with all other "directories".

Sounds interesting. Might be worth it to have an ipad version too. Most iPhone to iPad versions are just zoomed. If you write an ipad version too it would be great.

The rest of the thread discusses webfig, the built in web management interface that in 5.0 will expose all configuration options. At that point native applications are no longer needed, and any web interface would run full screen without zoom in the iPad's browser.

The rest of the thread discusses webfig, the built in web management interface that in 5.0 will expose all configuration options. At that point native applications are no longer needed, and any web interface would run full screen without zoom in the iPad's browser.

Except for those that would like to support older versions. Also native applications have the benefit of supporting other features such as

- Managing many devices
- Supporting older hardware/software
- Providing tools for networking that is not built into the device
- Monitoring many devices
- The ability to support new features that are not in the current version without needing to modify anything on the device. This would be especially important in production environments. A lot of people will not and cannot upgrade to new versions especially if they are in beta still. Some versions even released as stable incorporate severe bugs that need to be taken care of and upgrading just to improve the web interface is not worth it. Simply updating Winbox or any other native app is far safer for the user.

Don't let a web interface stop you from work on a native iphone app. I personally want no part of trying to use the web interface from my iphone. I would much rather be able to add multiple devices to my iphone app and not deal with the slow web response. Not to to mention if the web interface is not optimized for iphone viewing, it's just going to be more of a pain. Fumbling around with a clumsy web interface is not something I want to deal with while im out of town and a customer needs a fix in a hurry.

Except for those that would like to support older versions

Don't get me wrong, I fully support development of an iPhone app, it would be wonderful if a quality app can be developed.

But you will still need a recent version with API support, and you will need to enable API access.

congratulation to your decision to work on an native mikrotik iphone app.
i totally support you and i'd spend quite some money for such a piece of software.

i'd also like to support you as a beta tester.
i am running a wireless-isp network with a big number of mikrotiks.

cheers and greez
zoli

Thank you. I have not given up nor will I. I have slowed down a little as some other projects got in the way. This is still in development as we speak.

Are we able to download the application to test it by any chance?

Not currently. I had a couple people who I let beta test it though.

Just wanted to update you that I have had no problems with your beta. I have tried it with RB150, RB153, RB450, Crossroad, RB411AR and x86 versions with ROS 2.9.51 to 5 beta without any problems. I am looking forward to more functionality to test.

I missed this thread.

I'm interested in testing this app if you have more open spots. I'll send you my UDID.

how about in blackberry?

I realize I haven't gave you all much of an update recently. Been working on other projects and am no longer working for my previous company (using Mikrotik devices) anymore.

That said I really want to get this back on the road and get all my work I've done out there for you to use. So what I think I may do is release the app as is and update it as I can. This means you guys can use the current features as well as provide feedback for what you want added, changed or fixed. This is very helpful to me and the progression of the project now that I have only my personal copy of Winbox (currently 4.5 i believe) to test on. This also means that the more support the app gets the better it can become and it will progress much faster than it is currently.

The current features of the app as of now:
-Has a name. I will name is MikroManager
-Supports reading of all interfaces (as best I can tell). You can view all their settings as well as view the traffic monitor for them.
-Supports saving of devices for later access.
-Supports managing multiple devices (up to 3 currently) at the same time.
-Supports pinging devices in your list to check if they are online.

It would be great if you could release it. You would not believe how useful it would become

Hello!

Just wondering are there any updates on the software?
Maby it is possible to get the demo?
I would be really glad if i could also test it

This should be in the App Store soonish. Give me a week or two to clean it up and get it in the app store.

That will be awesome! Do you know if it will be compatible with the iPad?

Any news

Its in review for the App Store right now.

retina display supported?

It should be since its using mostly Apple SDKs for everything especially for graphics. I also am using an iPhone 4 for development and it looks fine.

I can't wait for this to be released.
Is there any chance you could add port knocking to the next release.

Someone emailed me and suggested port knocking. I would like to make this app full of features but I will probably be forced to hire someone to help me with this as I am currently loaded with projects so It is very hard for me to get much done.

Any word on when this will be on the app store? It'd make life much easier!

Apple contacted me because there were some small issues (one being my IP for my device changed so they couldn't test it). Anyways I fixed all that and sent it back. Sorry for the wait.

Any ETA on when mikromanager will be available on appstore?

Still waiting for Apple. They are very slow at approving stuff lately. Sorry for this.

Apple just told me it is now it the App Store.

I just got it and so far it's great. I can't wait til morning when I can really play with it

Be sure to leave reviews. Bear in mind it is not complete and I don't want to lead people on who may be expecting a lot right yet. It currently does exactly as stated in the description. As always I am open to suggestions and ideas.

Does it just do interfaces? Or all Winbox sections? The screenshots and description are so interface focused I'm slightly hesitant to purchase and see for myself.

Yes it currently only shows interfaces. If you were looking for more than that, I would hold off for now.

Thanks for the reply. I do hope it goes further.

Apple just told me it is now it the App Store.

One little question. The beta testers will receive a gift code???

BR

Mauricio

Apple just told me it is now it the App Store.

One little question. The beta testers will receive a gift code???

BR

Mauricio

Good question as I was one of the betatesters

I have been using it for the past day and it crashes about 50% of the time. Should I post details, email you, pm?

Yup! Crash's everytime I hit monitor status and advanced. The only usable real time data it gives without crashing is monitor traffic. . Darn it, was really hoping to use this to align antennas up on towers...

Email me with the email address you used before as a beta tester. Tell me what you liked/disliked about the app and Ill send you a promo code.

For the crashes... Yes I would like details on how you made the app crash. If I can recreate it I will definitely fix it for ya. PM me on these boards about the crash. Don't post the details in this board. This will allow me to track them easily. Thanks.

Email me with the email address you used before as a beta tester. Tell me what you liked/disliked about the app and Ill send you a promo code.

For the crashes... Yes I would like details on how you made the app crash. If I can recreate it I will definitely fix it for ya. PM me on these boards about the crash. Don't post the details in this board. This will allow me to track them easily. Thanks.

E-Mail sent...

BR

Mauricio

how about a link to the appstore ?

Just purchased it - Would be great to have it show the signal strength of the wireless interface.
Or better yet, having the ability to scan on the wireless interface.

I am actually in the process of working on the wireless stuff so that should actually be the next features added.

Appstore link:
http://itunes.apple.com/us/app/mikroman ... 04767?mt=8

For the crashes... Yes I would like details on how you made the app crash. If I can recreate it I will definitely fix it for ya. PM me on these boards about the crash. Don't post the details in this board. This will allow me to track them easily. Thanks.

I would like to PM you about the crash but unfortunately I can't. Don't know why.

Anyway the crash occurs when entering
Wireless > wireless interfaces > (interface) > advanced or monitor status

It happens either on 3.20 or 4.11

I will look into it and try to fix it. Thanks.

Email me with the email address you used before as a beta tester. Tell me what you liked/disliked about the app and Ill send you a promo code.

For the crashes... Yes I would like details on how you made the app crash. If I can recreate it I will definitely fix it for ya. PM me on these boards about the crash. Don't post the details in this board. This will allow me to track them easily. Thanks. :)

Maybe they could send a crash log? It should be created on iphone.

For the crashes... Yes I would like details on how you made the app crash. If I can recreate it I will definitely fix it for ya. PM me on these boards about the crash. Don't post the details in this board. This will allow me to track them easily. Thanks. :)

PMs are off on this board.

Ok good to know. Well you guys can post the issues here. I read them and get emailed every time someone post in this thread so that should work unless it gets out of hand.

I will look into the crash log thing because I have seen that before but never looked into it much.

Anyway the crash occurs when entering
Wireless > wireless interfaces > (interface) > advanced or monitor status

It happens either on 3.20 or 4.11

This is the same as I was seeing.
I was connecting to units that have 4.10 & 4.11

Anyway the crash occurs when entering
Wireless > wireless interfaces > (interface) > advanced or monitor status

It happens either on 3.20 or 4.11

This is the same as I was seeing.
I was connecting to units that have 4.10 & 4.11

+1
iPhone 4
have not been able to get into those areas. Pleaseeee see if u can get wireless signal strengths, bought it for that..

Below is how to find the crash log on your pc. Apparently iTunes auto sends these to me but my form claims that "Too few have been sent" so I cant see any. Sounds crazy to me but I guess we have to do this manually. If I still have the symbols from this build I can find the bug you guys are seeing (hoepfully). If I don't then ill have to find it manually which is fine.

Anyways send your crash log to me at valleyman86+Mikromanage@gmail.com. Actually if you guys have any support issues feel free to email me there.

Mac OS X : ~/Library/Logs/CrashReporter/MobileDevice/<DEVICE_NAME>
Windows XP: C:\Documents and Settings\<USERNAME>\Application Data\Apple computer\Logs\CrashReporter/<DEVICE_NAME>
Windows Vista: C:\Users\<USERNAME>\AppData\Roaming\Apple computer\Logs\CrashReporter/MobileDevice/<DEVICE_NAME>

The log file names start with application name and have the extension “crash”. They are just plain text files and can be sent by e-mail in original or zipped form, or even copy-pasted into your e-mail program.

hi, i have buy to applestore mikromanager but not connect my mikrotik on port 8728 " could not connect to device ip" and on port 8291 user o passw are incorrect.
i have iphone 3g os 4.0 mikrotik rb133 ros 4.11.
Please help me.
by Giuliano

Hey, Just purchased the app!!

Firstly many thanks for all the work you are doing, excellent product, I've been waiting for a product like this for ages and yours is top notch, very much looking forward to future releases and added fuctionallity.

Can I make a suggestion / feature request please?

I manage a national wisp with approx 2500 mikrotik devices of all forms from 532a's through the 400 range and up to the 1100's, I also am running a number of dell poweredge servers running routerOS also on the EDGE operating BGP etc.

With all these devices, manual inputting of each one is simply not a viable option, could you create some form of import where I could create a csv or something and drag it onto the iPhone/iPad?

Something along the lines of the import facility in the WiFiAlign app (which I highly recommend by the way!)

Hope this will be possible and implemented soon as I am unable to use the app fully until I can get all my devices into it!!!

Many thanks again for your top notch work!!!!!!!

@ikedw Sounds like you dont have the API enabled on the device. I would check into that.

@rickashe That is a good idea. I'll keep it in mind and try to think of a handy way to import multiple devices like that.

how do I check?
Iphone or rb133?
Thanks Giuliano

in RouterOS menu /ip service you can enable the API. it's required for the iphone program to work

Ok, is iphone connected.
I have another problem
on interfaces wireless advanced mode crash and monitor status crash the program.
can be change the setting Mikrotik with iphone?
By Giuliano

Dude, try reading a thread before posting, you might actually see a response to your question. :p

I am working on this bug now. Ill get it fixed asap.

i am sorry mm690. many thanks.
Bye

For those that are having a crash when viewing the wifi stuff can you send me some screenshots of the page? Maybe tell me how you got everything set up. I can't seem to recreate it.

I just purchased the app. I see others are using it so not sure what I am doing wrong. Is there a setup or something I need to do on the Mtk to make this work?

I started reading from the forum message that said its released on down, but didnt see much.

Maybe a how to install doc?

You must enable the API on the Mikrotik. I believe it is located in services...

Found it.

What is Radio A and Radio B?

Also you cannot edit the connection setup.... is there a trick to that?

Radio A/B is just a way to manage two radios at the same time. I plan on adding ability to add them dynamically. You can not currently edit a device. That is also being worked on.

OK cool. When you say "Radio" you mean Mikrotik Router and it might be a radio too?
thank you!

Yes actually where I worked with Mikrotik we had lots of Radios. Maybe I should change the name of those tabs to "Device". That may make more since since a Mikrotik does not necessarily have Wifi with it.

That makes sense now. thanks for the info!

Any timeline for an update ?

Would also be nice to :

see logs
reboot
firewall

I was wondering if people could tell me how they caused it to crash so that I could fix it. In my tests I was unable to make it happen. Also I like the idea of telling me features you want first. This will help prioritize stuff so they come first.

I have only played around with it a bit... but so far not crashes for me.


However I am on a RB750G (wired only router).