Page 1 of 1
RB44GV ON small form factor Machine
Posted: Thu Feb 25, 2010 12:14 am
by gmidia
Anybody worked with this scenario as the card would not fit. Had to remove the Cover and was able to only use 3 Ports the other is covered.
Re: RB44GV ON small form factor Machine
Posted: Mon Apr 26, 2010 7:07 am
by pablo
Worked fine for me in an ITX Intel D945GSEJT using the mini-box case and riser.
Re: RB44GV ON small form factor Machine
Posted: Mon Apr 26, 2010 9:03 am
by gmidia
how did you manage to place the rb44Gv . I had to remove the cover of the Machine it was a lenovo and in the end only 3 ports are usuable
Re: RB44GV ON small form factor Machine
Posted: Tue Apr 27, 2010 5:33 am
by pablo
The riser I used mounts the board horizontally instead of vertically:
http://www.mini-box.com/I-O-shield-and- ... -D945GSEJT
Someone did mention in another post that this board is now EOL.
Re: RB44GV ON small form factor Machine
Posted: Sat May 01, 2010 1:37 am
by csickles
Intel is EOLing the board.
Mini-box is EOLing the riser and I/O assy. accordingly..
BUMMER !!!