Page 1 of 1
connection without bridge
Posted: Mon Mar 08, 2010 5:46 pm
by danix
Hello, how can i make the rb450g to work : eth1(gateway) -> eth2, 3, 4 ,5 (lan) without bridge, only in filters. If it is possible. ( Tutorial or something like this. ) .thank you
Re: connection without bridge
Posted: Mon Mar 08, 2010 10:13 pm
by NAB
1 - Put each port into switch mode with one master (eth1?)
2 - Set up individual networks on each interface and use IP routing
What are you trying to achieve?
Re: connection without bridge
Posted: Tue Mar 09, 2010 10:59 am
by danix
HY, i do it with masquerade and input and its works.
I am trying to make an isp server with bandwith balance and limit over mac adress.
now if you can help me with this: bandwidth balance and limit over mac adress.
My configuration: RB450G (bandwith balance and limit over MAC ) -> Switch Alied Telesys (8000 MAC adress ) -> CLient MAC.