What do you find to work best for a 2 Mile PtP 3.65GHz stand alone antenna? Replaceing a current 5.8 link that is experiencing a lot of interference. Please advise.

I have a 5 mile link running these:

http://www.roc-noc.com/product.php?prod ... =38&page=1

I am seeing -60db so you might need to turn down the power at 2 miles.

Tom

I have a 5 mile link running these:

http://www.roc-noc.com/product.php?prod ... =38&page=1

I am seeing -60db so you might need to turn down the power at 2 miles.

Tom

how much bandwith do u get with it?

20.5Mbps in both directions at the same time using tcp

i am using the full 20MHz channels

Tom

20.5Mbps in both directions at the same time using tcp

i am using the full 20MHz channels

Tom

ive two olds 3.5 alvarion XL and I can use the build in 23dbi antenna, did u try it with in turbo mode ?

XR3 isn't FCC certified to use the entire 3.65 band, only the lower 25MHz without contention protocols.

Turbo on 3.65GHz isn't legal in the US where roc-noc is.

We are only allowed 25MHz of bandwidth here on the XR3. One reason I haven't jumped on that boat yet...

XR3 isn't FCC certified to use the entire 3.65 band, only the lower 25MHz without contention protocols.

Turbo on 3.65GHz isn't legal in the US where roc-noc is.

We are only allowed 25MHz of bandwidth here on the XR3. One reason I haven't jumped on that boat yet...

OK. but just to know it how much bandwith can deliver. same internal test .etc