Community discussions

MikroTik App
 
morgy
just joined
Topic Author
Posts: 21
Joined: Mon May 03, 2010 8:00 pm

mikrotik routerboard 411/411r

Mon May 03, 2010 8:25 pm

Hi

I have little problem with my mikrotik routerboard 411,
I use winbox..
from wireless table I associated my wireless antenna Mikrotik (station mode) with the access point, If I use a ping-tools (wlan interface) I can ping the access point in 3ms perfect!
But If I ping the Access Point with ping-tools (ethernet interface) I cannot ping the Access point, and from my PC I can ping ethernet interface, but I cannot ping Wlan interface or Access Point!
How can I bridge wlan interface with ethernet interface?

for some test I have used:
wlan interface 192.168.1.x
ethernet interface 192.168.1.x
or
wlan 192.168.1.x
ethernet 192.168.1.x
bridge 192.168..1.x
or
wlan 192.168.1.x
bridge 192.168.1.x

but never I have comunicate from my pc to Access point!
:(

May you help me?
 
User avatar
Ibersystems
Forum Guru
Forum Guru
Posts: 1686
Joined: Wed Apr 12, 2006 12:29 am
Location: Cabrils, Barcelona - Spain
Contact:

Re: mikrotik routerboard 411/411r

Mon May 10, 2010 4:07 pm

Hi,

you need to:

create a bridge
add ether1 port
add wlan1 port
put an IP address to ether1 port

It will work : D!
 
morgy
just joined
Topic Author
Posts: 21
Joined: Mon May 03, 2010 8:00 pm

Re: mikrotik routerboard 411/411r

Mon May 10, 2010 4:49 pm

ok I'll try thanks a lot,
but on 411/411R I have only 1 port ethernet and 1 port wlan,
is it the same?
 
User avatar
Ibersystems
Forum Guru
Forum Guru
Posts: 1686
Joined: Wed Apr 12, 2006 12:29 am
Location: Cabrils, Barcelona - Spain
Contact:

Re: mikrotik routerboard 411/411r

Mon May 10, 2010 4:58 pm

yes.
 
morgy
just joined
Topic Author
Posts: 21
Joined: Mon May 03, 2010 8:00 pm

Re: mikrotik routerboard 411/411r

Mon May 10, 2010 8:13 pm

Hi,

you need to:

create a bridge
add ether1 port
add wlan1 port
put an IP address to ether1 port

It will work : D!

Works well :)
thank you very very much
 
User avatar
Ibersystems
Forum Guru
Forum Guru
Posts: 1686
Joined: Wed Apr 12, 2006 12:29 am
Location: Cabrils, Barcelona - Spain
Contact:

Re: mikrotik routerboard 411/411r

Tue May 11, 2010 12:10 am

Perhaps my first karma vote?! ; D!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26931
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: mikrotik routerboard 411/411r

Tue May 11, 2010 8:23 am

Hi,

you need to:

create a bridge
add ether1 port
add wlan1 port
put an IP address to ether1 port

It will work : D!

Works well :)
thank you very very much
you should give him some karma points :)
 
morgy
just joined
Topic Author
Posts: 21
Joined: Mon May 03, 2010 8:00 pm

Re: mikrotik routerboard 411/411r

Tue May 11, 2010 10:32 am

Hi,

you need to:

create a bridge
add ether1 port
add wlan1 port
put an IP address to ether1 port

It will work : D!

Works well :)
thank you very very much
you should give him some karma points :)
just done :)
 
User avatar
Ibersystems
Forum Guru
Forum Guru
Posts: 1686
Joined: Wed Apr 12, 2006 12:29 am
Location: Cabrils, Barcelona - Spain
Contact:

Re: mikrotik routerboard 411/411r

Tue May 11, 2010 12:15 pm

Thanks! Lets catch chupaka!
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8712
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: mikrotik routerboard 411/411r

Tue May 11, 2010 3:58 pm

Lets catch chupaka!
Image
 
wirelesswaves
Member
Member
Posts: 311
Joined: Thu May 31, 2007 12:38 am

Re: mikrotik routerboard 411/411r

Tue May 11, 2010 11:34 pm

did I miss something here, or didn't he say he was in station mode!! Yet he was addressing without NAT! using same subnets too!

Try pseudobridge mode.

Add bridge,

Add wlan1 port into bridge
Add ether1 port into bridge.

Give Bridge 1 IP address only in same subnet as your PC and /24

Add a sprinkling of sugar and bake in an oven at 250 degrees for half an hour!

Someone give me a vote so I can start to catch up with Chupaka!