SNMP is not returning data in ap bridge mode
Posted: Mon May 24, 2010 12:31 am
Hi,
I have problem reading data using SNMP on interface with 2.4 GHz band (ap bridge mode).
- in console, interface, wireless print oid... listing is ok.
- snmpget/snmpwalk from external machine to any of these oids no value is returned (even oid is as non existing).
- on interface with band 5 GHz (apbridge mode) I get no such problem, each oid is giving correct value.
- tested on 2xRB600A and RB433, RouterOS 3.30, SNMP v1 and v2c.
can this problem be solved by upgrade to RouterOS 4.x?
With regards
Milan
I have problem reading data using SNMP on interface with 2.4 GHz band (ap bridge mode).
- in console, interface, wireless print oid... listing is ok.
- snmpget/snmpwalk from external machine to any of these oids no value is returned (even oid is as non existing).
- on interface with band 5 GHz (apbridge mode) I get no such problem, each oid is giving correct value.
- tested on 2xRB600A and RB433, RouterOS 3.30, SNMP v1 and v2c.
can this problem be solved by upgrade to RouterOS 4.x?
With regards
Milan