[admin@MikroTik] /system resource pci> pri
# DEVICE VENDORNAME IRQ
0 02:05.0 Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev: 2) 5
1 02:04.0 Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev: 2) 7
2 01:02.1 Intel Corporation 82546GB Gigabit Ethernet Controller (rev: 3) 12
3 01:02.0 Intel Corporation 82546GB Gigabit Ethernet Controller (rev: 3) 3
4 00:10.2 Broadcom CIOB-X2 PCI-X I/O Bridge (rev: 3) 0
5 00:10.0 Broadcom CIOB-X2 PCI-X I/O Bridge (rev: 3) 0
6 00:0f.3 Broadcom CSB5 LPC bridge (rev: 0) 0
7 00:0f.2 Broadcom OSB4/CSB5 OHCI USB Controller (rev: 5) 10
8 00:0f.1 Broadcom CSB5 IDE Controller (rev: 147) 0
9 00:0f.0 Broadcom CSB5 South Bridge (rev: 147) 0
10 00:03.0 ATI Technologies Inc Rage XL (rev: 39) 9
11 00:00.1 Broadcom GCNB-LE Host Bridge (rev: 0) 0
12 00:00.0 Broadcom GCNB-LE Host Bridge (rev: 50) 0
UHHUH nmi RECEIVED FOR UNKNOWN REASON 30 ON CPU 0
DO YOU HAVE A STRANGE POWRE SAVING MODE ENABLD
DAZED AND CONFUSD BUT TRYING TO CONTINUE
3.X version of the problem can not
5.0 need to wait a long time to see the work of the above tips before
Fuji and I have a server that is also a need to wait long time before the network port and the onboard network port work 1000M mode will not work sometimes