Page 1 of 1
Success Story OSPF/BGP
Posted: Wed May 26, 2010 11:16 am
by ste
Hi,
after a long time of hassling with OSPF/BGP on ROS it is real stable
now.
RB1000/ROS3.30/Routing test:
Uptime: 246d
Peers up: 46d
Full BGP Internet Feed
iBGP
OSPF
No problems, just running
)
Re: Success Story OSPF/BGP
Posted: Wed May 26, 2010 12:11 pm
by -headstrong-
How many peers do you have?
Looks very impressive
Re: Success Story OSPF/BGP
Posted: Wed May 26, 2010 1:01 pm
by ste
How many peers do you have?
Looks very impressive
3x RB1000 each has one external full feed.
Interconnected with iBGP.
Re: Success Story OSPF/BGP
Posted: Wed May 26, 2010 1:36 pm
by -headstrong-
Nice...could you explain your setup? very interested to know why you have 3x Feeds? Do you route different public IP's to different ISP's?
Re: Success Story OSPF/BGP
Posted: Wed May 26, 2010 1:56 pm
by ste
Nice...could you explain your setup? very interested to know why you have 3x Feeds? Do you route different public IP's to different ISP's?
I've an own netblock/AS announcing it with BGP. 2x100 to one Uplink-Carrier and 1x to a second.
It's for redundancy.
Re: Success Story OSPF/BGP
Posted: Wed May 26, 2010 2:18 pm
by Muqatil
2 Full feed EBGP + 1 IBGP
99d uptime
99d peer uptime
Re: Success Story OSPF/BGP
Posted: Thu May 27, 2010 3:29 am
by omega-00
What version are you running Medianet?
Re: Success Story OSPF/BGP
Posted: Thu May 27, 2010 9:13 am
by Muqatil
/system resource> pr
uptime: 14w2d15h16m27s
version: "4.5"
free-memory: 1452020kB
total-memory: 1946124kB
cpu: "Intel(R)"
cpu-count: 1
cpu-frequency: 3000MHz
cpu-load: 21
free-hdd-space: 92930kB
total-hdd-space: 122703kB
write-sect-since-reboot: 15830
write-sect-total: 52774648
architecture-name: "x86"
board-name: "x86"
Re: Success Story OSPF/BGP
Posted: Thu May 27, 2010 10:29 am
by Eising
> /system resource pri
uptime: 23w3d11h29m1s
version: "4.3"
free-memory: 876300kB
total-memory: 1556056kB
cpu: "e500v2"
cpu-count: 1
cpu-frequency: 1333MHz
cpu-load: 19
free-hdd-space: 484700kB
total-hdd-space: 520192kB
write-sect-since-reboot: 3625119
write-sect-total: 4731573
bad-blocks: 6
architecture-name: "powerpc"
board-name: "RB1000"
Handles a full feed directly, plus one via iBGP, both IPv4 and IPv6.
Re: Success Story OSPF/BGP
Posted: Fri May 28, 2010 8:10 pm
by j2sw
Doing any padding or anything of the like?
Re: Success Story OSPF/BGP
Posted: Mon May 31, 2010 9:17 am
by Eising
Padding? We do a bit of traffic engineering, such as setting communities and changing local-pref.