MikroTik

The Interface 11, 12, 13 on RB1100 are the giga port. when one of this interface (11, 12, y 13) have nothing connect they get up a traffic that is ridiculous like 220 MB. and this issue was in the 4.8, 4.9 4.10 version.


[admin@NOC] > interface ethernet monitor "ether12-> Spare"
status: no-link
auto-negotiation: done
rate: 1Gbps
full-duplex: yes


[admin@NOC] > interface monitor-traffic ether12
rx-packets-per-second: 139766875
rx-drops-per-second: 0
rx-errors-per-second: 0
rx-bits-per-second: 220.0Mbps
tx-packets-per-second: 0
tx-drops-per-second: 0
tx-errors-per-second: 0
tx-bits-per-second: 0bps

This is a known problem reported in both RB800 and RB1100 in another forum thread.

http://forum.mikrotik.com/viewtopic.php ... 00#p212336

We are waiting for new ROS and the fix.

Tom