Page 1 of 1
v2.9 Install Fails Using Router Installer 1.15
Posted: Thu Aug 25, 2005 8:10 pm
by ps
Hi,
I am trying to install v2.9 on a pc using Router Installer 1.15 but shortly after it tries to format the hdd, the following message is displayed...
sendto() failed: A blocking operation was interrupted by a call to WSACancelBlockingCall. (10004)
Any ideas as to what the problem could be???
Cheers,
Gerrard.
Posted: Thu Aug 25, 2005 8:27 pm
by sergejs
is this error appeared once ?
Posted: Thu Aug 25, 2005 8:41 pm
by ps
I rebooted the pc and restarted the process but the same thing happened.
Posted: Thu Aug 25, 2005 8:42 pm
by sergejs
download netinstall, and try once more.
Posted: Thu Aug 25, 2005 8:43 pm
by ps
OK. Give me a couple of minutes...
Posted: Thu Aug 25, 2005 8:48 pm
by ps
Downloaded
http://usa2.mikrotik.com/download/netinstall-2.9.zip and tried again but at "Transfering SYSTEM_2.NPK" or something, it fails with the same error.
Posted: Thu Aug 25, 2005 8:49 pm
by ps
...on the pc it says...
FATAL ERROR: bad network connection
Posted: Thu Aug 25, 2005 8:57 pm
by ps
Also tried the version from
http://www.mikrotik.com/download/netinstall-2.9.zip, just to be sure, but with the same result.
Time to go home now.
eoip and routing error
Posted: Thu Aug 25, 2005 9:09 pm
by tpsretard
sorry wrong place
Posted: Fri Aug 26, 2005 8:26 am
by sergejs
Is there a possibility to try another installation methods ?
Posted: Fri Aug 26, 2005 11:46 am
by ps
The frustrating thing about the installation process is that it never seems to work with usb source devices (floppy or cdrom) and as I am working with a very small form factor pc, the only other option is to rip a desktop pc apart and connect it's floppy cable to the internals of the target pc, which is how I managed to install v2.8. However, do I really have to do this every time I want to upgrade!?
I really need either netinstall or usb source devices to work.