MikroTik

Dear guys,
I have configured an HotSpot system using wiki tutorial, and then I have configured userman for manage user. My problem is that i can access to http://ether_router_IP/userman but I can't access to http://hotspot_router_IP/userman: why? How can I access to userman from hotspot interface?

I hope to receive an answer

Best regards

Hi guys,
i resolve problem! I insert ether IP address into walled-garden.

Thanks

Best regards

Hi guys,
i resolve problem! I insert ether IP address into walled-garden.

Thanks

Best regards

mktwifi,

can you please explain better how or what ip address you added to the walled-garden?

thank u

The IP address of whatever router you need to access gets added to the walled garden IP tab with an action of 'accept'.

The IP address of whatever router you need to access gets added to the walled garden IP tab with an action of 'accept'.

I will try.

Thanks

I am trying to access userman page while my hotspot enabled but I found Error 404: not found, when I deactivate userman I can access userman page, so I tried walled gardian but not successful, Can u explain more in details?


Thanks

I am trying to access userman page while my hotspot enabled but I found Error 404: not found, when I deactivate userman I can access userman page, so I tried walled gardian but not successful, Can u explain more in details?


Thanks

Same problem http://forum.mikrotik.com/viewtopic.php?f=13&t=96052 i hope someone will help us to sort this out

In my Router' office. I enable 3 Ethers of MT, so in my clients's system if i'm gonna use webfig I just enter another Ether's IP. No need to Walled Garden anything at all.
And It's good for security reasons, no one can easily open your webfig. Even I chenge the Port of "WWW" service so it's harder to open my webfig page. Simply you can add NAT rule in your router so that you will not have to enter port and Ip (//routerip:port ) in your server for ease of your self

In my Router' office. I enable 3 Ethers of MT, so in my clients's system if i'm gonna use webfig I just enter another Ether's IP. No need to Walled Garden anything at all.
And It's good for security reasons, no one can easily open your webfig. Even I chenge the Port of "WWW" service so it's harder to open my webfig page. Simply you can add NAT rule in your router so that you will not have to enter port and Ip (//routerip:port ) in your server for ease of your self

I don't understand, can you please explain

Sorry bluemoon.
I have 3 Ethers active. one for Hotspot and LAN and two others for internet.
If i'm gonna open my webfig or UM, I just enter another Ether's IP from client computer. should note that the only one who knows it it's me. so no one can open it easily so it's more secure.
So I think instead of Walled Gardening you router's IP in order to open in from Hotspot interface you can easily enter 2nd Ether's IP so you will access to your UM. I don't call this security because it's the basis of it.
I hope you understand my point.

Sorry bluemoon.
I have 3 Ethers active. one for Hotspot and LAN and two others for internet.
If i'm gonna open my webfig or UM, I just enter another Ether's IP from client computer. should note that the only one who knows it it's me. so no one can open it easily so it's more secure.
So I think instead of Walled Gardening you router's IP in order to open in from Hotspot interface you can easily enter 2nd Ether's IP so you will access to your UM. I don't call this security because it's the basis of it.
I hope you understand my point.

Thanks for your post. Our problem is different. I have two VLANs

192.168.42.1 - Vlan 42 Hotspot (login.myhotspot.xyz)
192.168.46.1 - Vlan 46 Signup Page

I'm trying to set a Hotspot. Hotspot is working fine, but when I try to signup a new account through 192.168.42.1/user/signup or login.myhotspot.xyz/user/signup, I am getting 404 Not Found error but hotspot user (vlan 42) can access same sign up page through 192.18.46.1/user/signup (vlan 46) but they can also see 192.168.46.1 (Router Login Page). How to deal with Error 404 and access UM Sign Up page from my hotspot vlan or prevent access to router login page and just allow sign up page through Vlan 46?

Walled garden is enabled and allowed

And if you disable that Walled Garden rule, would it be OK?

Sorry bluemoon.
I have 3 Ethers active. one for Hotspot and LAN and two others for internet.
If i'm gonna open my webfig or UM, I just enter another Ether's IP from client computer. should note that the only one who knows it it's me. so no one can open it easily so it's more secure.
So I think instead of Walled Gardening you router's IP in order to open in from Hotspot interface you can easily enter 2nd Ether's IP so you will access to your UM. I don't call this security because it's the basis of it.
I hope you understand my point.

Thanks for your post. Our problem is different. I have two VLANs

192.168.42.1 - Vlan 42 Hotspot (login.myhotspot.xyz)
192.168.46.1 - Vlan 46 Signup Page

I'm trying to set a Hotspot. Hotspot is working fine, but when I try to signup a new account through 192.168.42.1/user/signup or login.myhotspot.xyz/user/signup, I am getting 404 Not Found error but hotspot user (vlan 42) can access same sign up page through 192.18.46.1/user/signup (vlan 46) but they can also see 192.168.46.1 (Router Login Page). How to deal with Error 404 and access UM Sign Up page from my hotspot vlan or prevent access to router login page and just allow sign up page through Vlan 46?

Walled garden is enabled and allowed

I have this same issue - any resolution?

Hi everyone
I define hotspot on mikrotik 2011 wlan1 by range of 10.50.78.1/24 and I want to access to usermanger. how can I do that?
I've installed usermanager package and hotspot is activateT but I can't access userman.

-also. I get "radius server not responding mikrotik hotspot" on hotspot page. how can I set address of radius address and userman? what's the connection between them?
Thank's in advance