MikroTik

Can I use Mikrotik RouterOS instead of Cisco router to make an access server?

I use this hardwares to provide a dialup service in my isp.
1.Cisco AS5300
2.XAVi G.SHDSL modem
3.Radius server

and now I want to use mikrotik router.os instead of my Cisco AS5300.

Can I do this by FarSync_TE1?
http://www.farsite.com/datasheets/FarSy ... _G.704.pdf

Yes, that farsync card should be supported in RouterOS. Not sure about the rest of the requirements, don't know much about those mentioned ciscos.

My approach:
Old PC, RouterOS on it, box of beer, me on it, configuration, trying, then asking for a specific problem, if any.

Old PC doesn't cut it if you need millions of PPS and major BGP feeds

Yes, that farsync card should be supported in RouterOS. Not sure about the rest of the requirements, don't know much about those mentioned ciscos.

I know that farsync card is supported in RouterOS.
but i want to make an ACCESS SERVER by Mikrotik RouterOS.
Do you know what is an access server in dialup networks?

Well, first you need to TEST that dial-up perversion anyway, right?
How to do it, if no with an old PC and trial/cracked RouterOS?
Then, if it works with couple of users, you try to switch the dial-up pool over to an allready configured RouterOS, which is bought legally.
I never experiment such major changes with a working system.

Normi, where do you got the hundreds and thousands of users? Look at his HW.

This is The diagram of my current network:



And this is the diagram of new network that I want it

I'm also interested on this question, if I can use Mikrotik instead of CISCO. But my decision parameter lies on BGP:

CISCO config

no bgp enforce-first-as

Can Mikrotik do this?