What's new in 5.0beta5 (2010-Jul-23 14:50):

*) email - supports multiple CCs
*) fix 5&10MHz channel support for 11n cards;
*) ssh - fix ssh client crash;
*) ssh - password authentication is disabled for users with public keys;
*) ping - fixed ping packet-loss calculation;

http://www.mikrotik.com/download/router ... a5.torrent

In the torrent, the mipsbe packages are corrupt. The RB1000 packages worked. In the direct download, the mipsbe packages worked.

In my RB450 the cpu load very fast to 100%, and i can't access my usermanager from web, what wrong??. Now i make ROS beta4 againt. Do you have any solutuion for this???

Upgraded couple minutes ago and question.
When do wireless scan only have button start, where is stop button gone ?

Usually I do quick scan press stop and look results now I don't have any more stop scan is running until close scan window.

RouterOS 5.0beta5

* All files (requires a Torrent client)
* Combined package (http)
* All packages (Includes optional packages: view content)

View Content shows 4.10 files:
* advanced-tools-4.10.npk
* arlan-4.10.npk
* calea-4.10.npk
* dhcp-4.10.npk
* gps-4.10.npk
* hotspot-4.10.npk
* ipv6-4.10.npk
* isdn-4.10.npk
* kvm-4.10.npk
* lcd-4.10.npk
* mpls-4.10.npk
* multicast-4.10.npk
* ntp-4.10.npk
* ppp-4.10.npk
* radiolan-4.10.npk
* routerboard-4.10.npk
* routing-4.10.npk
* security-4.10.npk
* synchronous-4.10.npk
* system-4.10.npk
* ups-4.10.npk
* user-manager-4.10.npk
* wireless-4.10.npk

Hello. I would like to see a new version of the following configuration rollback feature on the timer. since it is usually placed on the radio long distances this feature will be quite handy. For example put a value then it is said that to use it for 5 minutes. After 5 minutes he returned to the starting position. and sometimes expose the parameters and the connection is lost had to go to a distant point. sorry for my bad English

I still have the problem (since beta 4) that opening up an IPv6 route closes WinBox. It happens on my RB750 but not on the RB433, both with a clean config.

Ros v5beta5 - torch dont work correct (first 20-40 rows show full ointerface speed on each IP), and where you hide STOP button ??

Meta router still does not work in 5.0B5. No console..

Hello. I would like to see a new version of the following configuration rollback feature on the timer. since it is usually placed on the radio long distances this feature will be quite handy. For example put a value then it is said that to use it for 5 minutes. After 5 minutes he returned to the starting position. and sometimes expose the parameters and the connection is lost had to go to a distant point. sorry for my bad English

Like this?
http://wiki.mikrotik.com/wiki/Manual:Console#Safe_Mode

on the RB800 does not start Dude v4.0beta2

add to winbox "Apply button for 5 minutes"

the /ping command in Beta5 only works in the scheduler the very first time it is used ...

i.e. Script that does ....

:log info ("ping result1=" . "$[/ping 8.8.8.8 count=3]");
:log info ("ping result2=" . "$[/ping 8.8.8.8 count=3]");
:log info ("ping result3=" . "$[/ping 8.8.8.8 count=3]");

Reboot the router .... log reports ....

ping result=3
ping result=
ping result=

This is an improvement on Beta 4 .... which did ...

ping result=
ping result=
ping result=

but still not quite there .... please help.

Any body have solution for any bugs at beta5, waiting solve with any version

I can confirm a 'feature' with ping result in beta5 =) to be fixed in beta6?

*) ssh - fix ssh client crash

sshd crashed again, after few hours, on alix board with ROS 5 beta5

velvet

Incorrect status of the interfaces: all interfaces are "running" even if nothing connected.

Incorrect status of the interfaces: all interfaces are "running" even if nothing connected.

That is normal for x86 as disable-running-check=yes is set by default.

Long time waiting beta 6 version................

That is normal for x86 as disable-running-check=yes is set by default.

Oppss, You right...
What is the command to make "disable-running-check=no"?

What is the command to make "disable-running-check=no"?

Hello there!

on RB/333 with beta5 bridge filter not working.

best regards,

Hallo there

I'm using openssh client to backup the config of my routers
since the changes of the ssh server in ros5 i cant perform export cmd like this

ssh -l admin my.mikrotik.com "export"
same with
ssh -l admin+ct my.mikrotik.com "export"

any ideas?
with routeros 4.11 its working

i dont like the binary backup because the binary backups are not platform independent
when you import a binary config of a rb450 into rb750 you have got no serial cable to set the interfaces right

*) ssh - password authentication is disabled for users with public keys;
i don't understand this change... you expect a security whole?
i think this is not the default behavior of an ssh server

thanks