Hi,

I'm new in routeros. i need some help to configure my routeros. I have 8 wan connection with equal upload and download. I want to make a good load balance. My local network ip blocks are 192.168.11.0/24 and 192.168.12.0/24. So basically i need:

1. load balance
2. standard upload and download limit for each clients ( 2 Mb download and 256k upload)
3. traffic seperating for http, p2p, skype etc

thats all, any help will be appriciate

you can use Mangle to mark certain types of traffic with routing marks, and send each type through a different gateway (with routes based on those routing marks). ECMP can break things, for example programs that make multiple connections could have problems if they receive answers through different gateways.

Hi,

I'm new in routeros. i need some help to configure my routeros. I have 8 wan connection with equal upload and download. I want to make a good load balance. My local network ip blocks are 192.168.11.0/24 and 192.168.12.0/24. So basically i need:

1. load balance
2. standard upload and download limit for each clients ( 2 Mb download and 256k upload)
3. traffic seperating for http, p2p, skype etc

thats all, any help will be appriciate

Use something like this;

add action=mark-routing chain=prerouting comment="" disabled=no \
new-routing-mark=HTTP passthrough=no protocol=tcp src-address=\
192.168.11.0/24 src-port=80

This will mark traffic from that subnet as HTTP when it uses port 80

Then in the route just select HTTP from the Routing Mark drop down box and specify which gateway to use.

I hope this helps, it works for me as I use it to seperate voice and data.