I set up all as in http://wiki.mikrotik.com/wiki/User_Manager/DHCP_Example but can't get ip address.
in log mikrotik i have "ryd16-2_err-: dhcp1: radius authentication failed for 00:22:41
:26:B9:AA: no valid profile found"
what "profile" and were i must set up it i don't know.
can anyone help me.
Re: problem with config user manager as radius server
I don't use radius for DHCP. Try
/ip dhcp-server
set X use-radius=no
/ip dhcp-server
set X use-radius=no
Re: problem with config user manager as radius server
you don't use radius but i want to use radius)) and i need answer please help.
Re: problem with config user manager as radius server
I use radius, just not for dhcp. I can tho. Do you have radius logging enabled?
/system logging
add topics=radius action=memory
For dhcp, User manager should only return Access-Accept and the ip address (Framed-IP-Address for FreeRADIUS users) or the ip pool (Framed-Pool) when the mac address is sent. You can only return attributes that apply to dhcp. No Mikrotik-Group or anything like that.
Take a look at the wiki. It shows what you can send with Access-Accept.
http://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server
/system logging
add topics=radius action=memory
For dhcp, User manager should only return Access-Accept and the ip address (Framed-IP-Address for FreeRADIUS users) or the ip pool (Framed-Pool) when the mac address is sent. You can only return attributes that apply to dhcp. No Mikrotik-Group or anything like that.
Take a look at the wiki. It shows what you can send with Access-Accept.
http://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server