I'm having problem with 5ghz Point to Point link - when it disconects it can't get asociascion for some minutes.
On client router in log:
After some trys:12:45:00 wireless,info Wlan-Client: failed to connect to 00:03:7F:BE:F1:64, join timeout
12:45:00 wireless,info Wlan-Client: failed to connect to 00:03:7F:BE:F1:64, join timeout
12:45:06 wireless,debug Wlan-Client: STA starts scanning
12:45:06 wireless,debug Wlan-Client: STA scan over, results:
12:45:06 wireless,debug 00:03:7F:BE:F1:64: on 5725 SSID Wlan-AP caps 0x421 rates 0x4000 basic 0x4000 MT: yes
12:45:06 wireless,debug Wlan-Client: must select network
12:45:06 wireless,debug Wlan-Client: 00:03:7F:BE:F1:64 failed to join recently
12:45:06 wireless,debug Wlan-Client: no network that satisfies connect-list, by default choose with strongest signal
12:45:06 wireless,debug Wlan-Client: failed to select network
12:45:06 wireless,debug Wlan-Client: delaying scanning
Client router wireles config:
AP router wirreles config:1 R name="Wlan-Client" mtu=1500 mac-address=00:03:7F:BE:F1:72 arp=enabled disable-running-check=no
interface-type=Atheros AR5213 radio-name="00037FBEF172" mode=station ssid="Wlan-AP" area=""
frequency-mode=superchannel country=no_country_set antenna-gain=0 frequency=5725 band=5ghz scan-list=5725
rate-set=configured supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
basic-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps max-station-count=2007
ack-timeout=dynamic tx-power-mode=default noise-floor-threshold=default periodic-calibration=default
burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled wds-default-bridge=none
wds-ignore-ssid=no update-stats-interval=disabled default-authentication=yes default-forwarding=yes
default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default disconnect-timeout=3s
on-fail-retry-time=100ms preamble-mode=both compression=no
1 R name="Wlan-AP" mtu=1500 mac-address=00:03:7F:BE:F1:64 arp=enabled
disable-running-check=no interface-type=Atheros AR5213
radio-name="Wlan-AP" mode=ap-bridge ssid="Wlan-AP" area=""
frequency-mode=superchannel country=no_country_set antenna-gain=0
frequency=5725 band=5ghz
scan-list=5470,5475,5480,5485,5490,5495,5500,5505,5510,5515,5520,5525,
5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,
5590,5595,5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,
5650,5655,5660,5665,5670,5675,5680,5685,5690,5695,5700,5705,
5710,5715,5720,5725
rate-set=configured supported-rates-a/g=48Mbps basic-rates-a/g=48Mbps
max-station-count=2007 ack-timeout=dynamic tx-power-mode=default
noise-floor-threshold=default periodic-calibration=default
burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled
wds-default-bridge=none wds-ignore-ssid=no
update-stats-interval=disabled default-authentication=yes
default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
hide-ssid=no security-profile=default disconnect-timeout=3s
on-fail-retry-time=100ms preamble-mode=both compression=no
