Does this combination work?
I have several RB450 that work just fine with IPv6, but the RB1100 just refuses to advertise Ipv6 addresses. Here is my Ipv6 config:
LAN is a bridge interface and uplink_connection (a vlan) works just fine./ipv6 address
add address=2001:XXX:2300:fffe::6/126 advertise=no comment="" disabled=no \
eui-64=no interface=uplink_connection
add address=2001:XXX:2300:1f6c::1/64 advertise=yes comment="" disabled=no \
eui-64=no interface=LAN
/ipv6 nd
add advertise-dns=yes advertise-mac-address=yes disabled=no hop-limit=\
unspecified interface=all managed-address-configuration=no mtu=\
unspecified other-configuration=no ra-delay=3s ra-interval=3m20s-10m \
ra-lifetime=30m reachable-time=2m retransmit-interval=5s
/ipv6 nd prefix default
set autonomous=no preferred-lifetime=1w valid-lifetime=4w2d
/ipv6 route
add disabled=no distance=254 dst-address=::/0 gateway=2001:XXX:2300:fffe::5 \
scope=30 target-scope=10
I run out of ideas so any help is appreciated.
P.
