Page 1 of 1

Sector writes

Posted: Tue Feb 22, 2011 1:40 pm
by daniuser
Hello

I have a RB750G running RouterOS v4.16. Since the last reboot (18 days ago) I have about 3 million sector writes (Total 11 mil). What could be causing them?
NTP Client active, Logging settings default. The log only show's when I've connected via winbox.

Re: Sector writers

Posted: Tue Feb 22, 2011 1:41 pm
by normis
any webproxy, dude, user manager installed?

Re: Sector writes

Posted: Tue Feb 22, 2011 1:43 pm
by daniuser
Nope.
Admin is the only user.

Re: Sector writes

Posted: Tue Feb 22, 2011 1:47 pm
by jtroybailey
I think what normis is asking is weather you have thoes modules installed and using them

Re: Sector writes

Posted: Tue Feb 22, 2011 1:50 pm
by daniuser
I'm not using any of them.

Re: Sector writes

Posted: Tue Feb 22, 2011 1:59 pm
by janisk
you could also change configuration a lot, log to file, have set up hotspot and have some configuration in webproxy.

Re: Sector writes

Posted: Tue Feb 22, 2011 2:05 pm
by daniuser
I didn't change the configuration since then (I'm using the router at home with only a few PC's behind it), nor do I log the a file. I also don't have any wireless devices
[admin@MikroTik] /ip proxy> print
                 enabled: no
             src-address: 0.0.0.0
                    port: 8080
            parent-proxy: 0.0.0.0
       parent-proxy-port: 0
     cache-administrator: "webmaster"
          max-cache-size: none
           cache-on-disk: no
  max-client-connections: 600
  max-server-connections: 600
          max-fresh-time: 3d
   serialize-connections: no
       always-from-cache: no
          cache-hit-dscp: 4
             cache-drive: system

Re: Sector writes

Posted: Tue Feb 22, 2011 6:38 pm
by daniuser
In the store list I have one called web-proxy1. It was probably created when I tried out the web-proxy for a few minutes after buying the router.
[admin@MikroTik] /store> print
Flags: X - disabled, A - active 
 #   NAME                     TYPE                   DISK                   STATUS   
 0 A web-proxy1               web-proxy              system                 active   
However I can't disable/remove it:
[admin@MikroTik] /store> disable web-proxy1
store is used
[admin@MikroTik] /store> remove web-proxy1
store is used
Who is using it if the web-proxy is disabled? A reboot doesn't help.

Re: Sector writes

Posted: Tue Mar 22, 2011 6:45 pm
by nur16
Please see menu IP > Web Proxy > Web Proxy Settings, then go to Status window. You will see that Uptime is not a zero time (probably uptime is time since last reboot). You should corecttly stops Web Proxy service.