Page 1 of 1
QoS and PPPoE profile (via PCQ) one machine...it's possible?
Posted: Wed Feb 23, 2011 4:18 pm
by magnavox
I configured a Mikrotik PPPoE Server managing user profiles via:
- PPPoE dinamic address-lists
- MANGLE packet mark
- Queue Tree and PCQ
This config work fine.
It's possible to add QoS (or traffic priorization/categorization for HTTP, P2P, DNS, ...) on the same machine?
Or I need to add a dedicatd QoS manager?
tnx
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Wed Feb 23, 2011 5:17 pm
by Noman
dear can u post ur config i also need that...
thks in advance...
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Wed Feb 23, 2011 5:39 pm
by magnavox
dear can u post ur config i also need that...
thks in advance...
Please, send me a MSN contact.
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Wed Feb 23, 2011 5:40 pm
by Noman
U give me ur msn contact so i can add u
thks for reply.....
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Wed Feb 23, 2011 6:03 pm
by fewi
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Thu Feb 24, 2011 1:59 pm
by magnavox
I know.
But I have some troubles: it's possible to manage global-upload and global-dowload separatly?
Using PPPoE I have one interface to Internet, and many interfaces to Clients, not one interface to clients.
In this case, prerouting rule intercept all traffic and i cannot sepate UP and DOWN.
I m wrong?
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Thu Feb 24, 2011 5:10 pm
by fewi
Can't say I've tried, but lab it out. Traffic still leaves through a physical interface.
If that physical interface doesn't allow you to do the second level of QoS outside of global-in and global-out you need to use two shapers in a row.
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Thu Feb 24, 2011 5:29 pm
by magnavox
Can't say I've tried, but lab it out. Traffic still leaves through a physical interface.
If that physical interface doesn't allow you to do the second level of QoS outside of global-in and global-out you need to use two shapers in a row.
Yes, using PPPoE clients interfaces are dinamically created... so must use Global-in or Global-out. Second shaping is not possible (I m not wrong) on same machine.
Suggestion for second shaper? Transparent bridge shaper?
tnx
Re: QoS and PPPoE profile (via PCQ) one machine...it's possi
Posted: Fri Feb 25, 2011 11:24 am
by Noman
dear kindly put the full configuration of that PCQ + PPPoe
advance thanks...