On distance more than 40 km disgustingly work the nv2
Sharply level of a signal falls and level of noise raises. Inclusion interface deenergizing helps
on the bridge rx -70 to -84 noise -115 to -97
on the station bridge All in norm
You interchange the position of base and client options
The picture changes too
Problems on bridge
10:20:04 wireless,info 00:0C:42:62:E3:9A@wlan1: disconnected, control frame timeou
t
10:20:06 wireless,info 00:0C:42:62:E3:9A@wlan1: connected
10:20:09 wireless,info 00:0C:42:62:E3:9A@wlan1: disconnected, control frame timeou
t
10:20:10 wireless,info 00:0C:42:62:E3:9A@wlan1: connected
10:20:14 wireless,info 00:0C:42:62:E3:9A@wlan1: disconnected, control frame timeou
t
10:20:15 wireless,info 00:0C:42:62:E3:9A@wlan1: connected
nstreme Works without ruptures but a bit more slowly
nv2 42км r52Hn
tdma 4 ms
radius 50 км
_______________________________________________________________________
56 km nv2 rb411 r52hn
11:16:49 wireless,info 00:0C:42:64:52:7B@wlan1: connected
11:51:54 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
11:51:55 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:13:14 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:13:14 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:24:30 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:24:30 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:35:27 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:35:28 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:37:08 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:37:08 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:37:48 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:37:48 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:40:38 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:40:38 wireless,info 00:0C:42:64:52:7B@wlan1: connected
tdma 3ms
radius 60
I can help with testing nv2 on distances from 40 to 60 km