Page 1 of 1
Hi my RB433Ah is not booting
Posted: Sun Apr 10, 2011 7:28 pm
by birendersinghbudhwar
Hi Mikrotik Please help me to boot my device...
When i start my RB433AH is giving only one beep and then stop and not packet is transferred on network interface any suggestion.... please.
Birender
Re: Hi my RB433Ah is not booting
Posted: Sun Apr 10, 2011 9:17 pm
by fewi
What does the serial console show?
Re: Hi my RB433Ah is not booting
Posted: Mon Apr 11, 2011 9:01 am
by birendersinghbudhwar
What does the serial console show?
Nothing is shown in the console windows.
But when i start router it gives only one beep.
Re: Hi my RB433Ah is not booting
Posted: Tue Apr 12, 2011 5:41 am
by birendersinghbudhwar
From Mikrotik please any suggestion or solutions is highly appropriated.
Re: Hi my RB433Ah is not booting
Posted: Tue Apr 12, 2011 8:53 am
by roc-noc.com
What does the serial console show?
Nothing is shown in the console windows.
But when i start router it gives only one beep.
Do you have a crossover serial cable connected and a terminal program running on your PC with the right settings?
There should be some informative output if it is getting a single beep.
Tom
Re: Hi my RB433Ah is not booting
Posted: Tue Apr 12, 2011 9:07 am
by birendersinghbudhwar
What does the serial console show?
Nothing is shown in the console windows.
But when i start router it gives only one beep.
Do you have a crossover serial cable connected and a terminal program running on your PC with the right settings?
There should be some informative output if it is getting a single beep.
Tom
Hi
I have a serial cable but I don't know if it is an crossover serial cable or standard cable how to know that it is crossover serial cable.
Birender
Re: Hi my RB433Ah is not booting
Posted: Thu Apr 14, 2011 10:01 am
by birendersinghbudhwar
Hi thanks for the solutions I am able to reinstall the ROS with net install with serial console cable and putty and serial to USB hub.
thanks
Birender
Re: Hi my RB433Ah is not booting
Posted: Tue Apr 26, 2011 11:56 pm
by Radiokot
Hello, Mikrotik. Your e-mail support is keeping silence.
I have had the same problem.
The information from the console:
.....
Setting up elf image... OK
Jumping to kernel code
/sbin/init: '/lib/libgcc_s.so.1' is not an ELF file
/sbin/init: '/lib/libgcc_s.so.1' is not an ELF file
/sbin/init: can't load library 'libgcc_s.so.1'
Kernel panic - not syncing: Attempted to kill init!
May be this will help you to solve your bugs...