Hi,

Hoping someone can help me with this VLAN question. Here is my setup:

[Cisco 3550] -- [Canopy CMM] -- [Canopy BH (MASTER)] <--------AIRLINK-------> [Canopy BH (SLAVE)] -- [MT 450G]

There is a /30 that connects the Cisco 3550 to the MT 450G. This /30 is a VLAN interface on both the Cisco and the MT 450G. Connectivity works. The problem is with the management interface of the Canopy BH Slave that is connected to the MT. I need to carry both the /30 and the management IP of the BH Slave (RFC 1918) space into ether1 of the MT. I cannot get this working. I have tried creating a new VLAN interface on the MT on ether1 for a management network (10.20.10.1/24) and given the BH Slave an IP address on this VLAN. I also set the "Management VID" of the BH Slave to this VLAN.

With this configuration, I still cannot access the management interface on the Canopy BH Slave. Does anyone have any idea how to do this?

Thanks.

Maybe i miss interpret, but it looks to me like your mikrotik is connected directly to the BH slave, probably lan cable?