Page 1 of 1
upgrade from UB5 card to mikrotik N card using single chain
Posted: Thu Jul 07, 2011 7:12 am
by marceloru
I need to update the cards (UB5), I need your recommendation to select best N mikrotik card that can be used in simple polarity (single chain) and the best way to connect that chain to use and which left unconnected.
antenas are 5ghz panes 90°, routerboard 433
now use 10mhz channels A rates, using N cards in 10mhz channel can negotiate N rates?
Re: upgrade from UB5 card to mikrotik N card using single ch
Posted: Thu Jul 07, 2011 9:26 pm
by marceloru
Please, someone tested the Mikrotik N cards using 1 pitail (1 chain) 10MHz only can help me decide which model would be better to replace ub5?
Re: upgrade from UB5 card to mikrotik N card using single ch
Posted: Fri Jul 08, 2011 1:48 am
by mgutz2
I already I have tried and it worked fine.
how much traffic you want to spend?
Re: upgrade from UB5 card to mikrotik N card using single ch
Posted: Fri Jul 08, 2011 6:43 am
by marceloru
which model do you recommend? R52Hn or R52nM?
connect only chain 0? or 1?
now UB5 at 5ghz A 10mhz channel width, delivers up to 8 / 9 Mbits smoothly, with 45 clients connected
9.5/10.5mbits ping times go from 3 ms to 150ms
my 80% cpe can use N rates,
I want to deliver at least 15-20 megabits per panel, maintaining a 2-5ms ping, using 10MHz channels