Dear Sir,


I am using RB750 and i make the hotspot but the problem is when i start ip scanner or scan ip's from netscan its shows me the alive ip's with the Router Board's Interface Mac Address on every IP. Second thing is my Lan Interface having 172.16.1.1/24 and wan interface ip having ip 192.168.1.10/24 and my route gateway is 192.168.1.1. and i need to use my another adsl modem in the local network i set the ip address of my adsl modem is 10.10.10.1. Now if i want to use my adsl services on my windows xp with the manual ip method
ip address = 10.10.10.100
subnet mask = 255.255.255.0
default gateway = 10.10.10.1
preffered dns = 10.10.10.1
Mikrotik Hotspot page appears and asking login and password.
Kindly Please Solve this Issue i really need to use my adsl for my personal downloading.
and kindly tell me the Solution for Net Scan or for ip Scanner.

Remove the address pool from the Hotspot to turn off Universal NAT, which also kleeps the Hotspot from doing proxy ARP.

i just remove the ip pool but problem still not solved. So kindly tell me in easy method. please.

Post the output of "/ip address print detail", "/ip route print detail", "/interface print", "/ip firewall export", "/ip hotspot export", and an accurate network diagram.

===== DSl Modem 1===================DSL Modem 2======
192.168.0.1 192.168.1.1
|
|
|
|
Lan= 172.16.1.1/24





[TELSTRA@Telstra Broadband] > ip address print detail
Flags: X - disabled, I - invalid, D - dynamic
0 address=172.16.1.1/24 network=172.16.1.0 interface=Lan
actual-interface=Lan

1 address=192.168.1.2/24 network=192.168.1.0 interface=Wan3
actual-interface=Wan3

2 address=192.168.0.2/24 network=192.168.0.0 interface=Wan2
actual-interface=Wan2




[TELSTRA@Telstra Broadband] > ip route print detail
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
0 A S dst-address=0.0.0.0/0 gateway=192.168.1.1
gateway-status=192.168.1.1 reachable Wan3 distance=1 scope=30
target-scope=10 routing-mark=youtube ptcl

1 A S dst-address=0.0.0.0/0 gateway=192.168.1.1
gateway-status=192.168.1.1 reachable Wan3 distance=1 scope=30
target-scope=10 routing-mark=youtube

2 A S dst-address=0.0.0.0/0 gateway=192.168.0.1
gateway-status=192.168.0.1 reachable Wan2 distance=1 scope=30
target-scope=10

3 ADC dst-address=172.16.1.0/24 pref-src=172.16.1.1 gateway=Lan
gateway-status=Lan reachable distance=0 scope=10

4 ADC dst-address=192.168.0.0/24 pref-src=192.168.0.2 gateway=Wan2
gateway-status=Wan2 reachable distance=0 scope=10

5 ADC dst-address=192.168.1.0/24 pref-src=192.168.1.2 gateway=Wan3
gateway-status=Wan3 reachable distance=0 scope=10




[TELSTRA@Telstra Broadband] > /interface print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU MAX-L2MTU
0 ether1 ether 1500 1526
1 R Wan2 ether 1500 1524 1524
2 R Wan3 ether 1500 1524 1524
3 ether4 ether 1500 1524 1524
4 R Lan ether 1500 1524 1524





[TELSTRA@Telstra Broadband] > /ip firewall export
# aug/05/2011 21:40:36 by RouterOS 5.5
# software id = PRDI-MC0Y
#
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
tcp-close-wait-timeout=10s tcp-established-timeout=1d \
tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \
tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no \
tcp-time-wait-timeout=10s udp-stream-timeout=3m udp-timeout=10s
/ip firewall filter
add action=passthrough chain=unused-hs-chain comment=\
"place hotspot rules here" disabled=yes
/ip firewall mangle
add action=mark-routing chain=prerouting disabled=no dst-address=\
221.120.0.0/16 new-routing-mark="youtube ptcl" passthrough=yes \
src-address=172.16.1.0/24
add action=mark-routing chain=prerouting disabled=no dst-address=\
74.125.0.0/16 new-routing-mark=youtube passthrough=yes src-address=\
172.16.1.0/24
/ip firewall nat
add action=passthrough chain=unused-hs-chain comment=\
"place hotspot rules here" disabled=yes
add action=masquerade chain=srcnat comment="masquerade hotspot network" \
disabled=no src-address=172.16.1.0/24
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061
set pptp disabled=no





I upload my Network Diagram.

Please Kinldy help me out i cant use my manual ip on this network hotspot is asking username and password and then my internet is working on mikrotik hotspot instead of my adsl modem.i really need to use my adsl modem services in my private use and stop this scan issue. please kindly guide the solution.

If you have the two DSL modems connected to the same router, and have a Hotspot configured on an interface on the same router and are behind that Hotspot interface of course the Hotspot is going to intercept your traffic. The only path from the client to the second DSL modem is through the Hotspot interface, after all.

Change your network design so that the second DSL modem is available to the client without passing through the Hotspot interface.

ok i got u but kindly please tell me about scanning ips because of mikrotik my netscan shows dead host with RB750 ether mac address. kindly Solution please.

Post the output of "/ip hotspot export".

ip hotspot export
# aug/29/2011 23:48:18 by RouterOS 5.6
# software id = PRDI-MC0Y
#
/ip hotspot profile
set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot \
http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap \
name=default rate-limit="" smtp-server=0.0.0.0 split-user-domain=no \
use-radius=no
add dns-name=portal.telstra.com hotspot-address=172.16.1.1 html-directory=\
hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=\
cookie,http-chap name=hsprof1 nas-port-type=wireless-802.11 \
radius-accounting=no radius-default-domain="" radius-location-id="" \
radius-location-name="" radius-mac-format=XX:XX:XX:XX:XX:XX rate-limit="" \
smtp-server=0.0.0.0 split-user-domain=no use-radius=yes
/ip hotspot
add address-pool=hs-pool-5 addresses-per-mac=1 disabled=no idle-timeout=5m \
interface=Lan keepalive-timeout=none name=hotspot1 profile=hsprof1
/ip hotspot user profile
set default idle-timeout=none keepalive-timeout=2m name=default shared-users=\
1 status-autorefresh=1m transparent-proxy=no
add advertise=no idle-timeout=none keepalive-timeout=2m name="512 users" \
open-status-page=http-login shared-users=1 status-autorefresh=1m \
transparent-proxy=yes
add advertise=no idle-timeout=none keepalive-timeout=2m name=1mb \
open-status-page=http-login rate-limit=100k/800k shared-users=1 \
status-autorefresh=1m transparent-proxy=yes
add address-pool=hs-pool-5 advertise=no idle-timeout=none keepalive-timeout=\
2m name="1mb limit" open-status-page=http-login shared-users=1 \
status-autorefresh=1m transparent-proxy=yes
/ip hotspot service-port
set ftp disabled=no ports=21
/ip hotspot user
add disabled=no name=xxxxx password=xxxxxxxx profile=default

That still shows address pools on the Hotspot server as well as the user profiles. I suggested to remove them on July 25th. Do that.

i remove the pools this is the new configuration please check again and let me know the mistake again please.



[TELSTRA@Telstra Broadband] > ip hotspot export
# aug/30/2011 04:25:57 by RouterOS 5.6
# software id = xxxx-xxxx
#
/ip hotspot profile
set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot \
http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap \
name=default rate-limit="" smtp-server=0.0.0.0 split-user-domain=no \
use-radius=no
add dns-name=portal.telstra.com hotspot-address=172.16.1.1 html-directory=\
hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=\
cookie,http-chap name=hsprof1 nas-port-type=wireless-802.11 \
radius-accounting=no radius-default-domain="" radius-location-id="" \
radius-location-name="" radius-mac-format=XX:XX:XX:XX:XX:XX rate-limit="" \
smtp-server=0.0.0.0 split-user-domain=no use-radius=yes
/ip hotspot
add disabled=no idle-timeout=5m interface=Lan keepalive-timeout=none name=\
hotspot1 profile=hsprof1
/ip hotspot user profile
set default idle-timeout=none keepalive-timeout=2m name=default shared-users=1 \
status-autorefresh=1m transparent-proxy=no
add advertise=no idle-timeout=none keepalive-timeout=2m name="512 users" \
open-status-page=http-login shared-users=1 status-autorefresh=1m \
transparent-proxy=yes
add advertise=no idle-timeout=none keepalive-timeout=2m name=1mb \
open-status-page=http-login rate-limit=100k/800k shared-users=1 \
status-autorefresh=1m transparent-proxy=yes
add advertise=no idle-timeout=none keepalive-timeout=2m name="1mb limit" \
open-status-page=http-login shared-users=1 status-autorefresh=1m \
transparent-proxy=yes
/ip hotspot service-port
set ftp disabled=no ports=21
/ip hotspot user
add disabled=no name=xxxx password=xxxxxxx profile=default

That looks better.
You reported this issue:

ok i got u but kindly please tell me about scanning ips because of mikrotik my netscan shows dead host with RB750 ether mac address. kindly Solution please.

With the new configuration as you posted it just now that problem should be fixed.

yeah my both problems are fixed thanks allot. scanning and internal using dsl problem is fixed. u said for scanning but the dsl is working also on manual ip method hotspot is not asking password on different ip pool which is used by local internet hotspot lan but the dsl ip strange then the hotspot pool.
thanks allottttttttttttttttttttttttt
uuummmuuuaaaaaaaaaaaa
have tea please.
or Need Something? Kindly Tell me. i will try my best to help you out.
Thanks Allot. and Eid Mubarak.