MikroTik

Hi,

Can anybody help me out?

I am running version 2.8.11, I have a bridge (IP = 10.0.0.1 for Admin purpose) which contains three NIC; ether1 connects to the Internet, while ether2 connects to a switch where other nodes are connected.

The Microtik box was actually designed to be a bandwidth manager, but now I want to implement a wired HotSpot on ether3 which worked fined but nodes on ether2 cant access the internet since HotSpot is using tcp port 80.

How can I change the HotSpot tcp port?

Thank You

Yummy

You can change the port in IP->Services.

Yeah, thanks! But when running the HotSpot setup, I am forced to use another port for www services since it appears port 80 is default for HotSpot. Hence after changing port in IP->Services I still have to do some changes manual in Firewall but after doing this I could get the login screen and logon but cant browse the Internet from the HotSPot client

You can change the port in IP->Services.

Yeah, thanks! But when running the HotSpot setup, I am forced to use another port for www services since it appears port 80 is default for HotSpot. Hence after changing port in IP->Services I still have to do some changes manual in Firewall but after doing this I could get the login screen and logon but cant browse the Internet from the HotSPot client

You can change the port in IP->Services.

you can change it at firewall by youself by hand,remember to change all of hotspot'80 port in firewall config.

try it .

my english is poor,so may writer is not right,by the mean is true.

Thanks Pals, I finally got the HotSpot to work and it does so beautifully. The only problem now is how can I exclude some systems from been authenticated?

Thank you

YomiCiouz