MikroTik • setup mesh with 3 omnitik

Page 1 of 1

setup mesh with 3 omnitik

Posted: Tue Nov 08, 2011 2:29 pm

by reza.mnp

http://wiki.mikrotik.com/wiki/Testwiki/ ... s_networks

above link describe mesh network with routerbard (2 radio and 2 antenna)

how setup mesh network on 3 omnitik?

Re: setup mesh with 3 omnitik

Posted: Tue Nov 08, 2011 3:17 pm

by sadeghrafie

In there :

In this example show mesh configuring between RouterA and RouterB because configuration on other mesh nodes are very similar main difference is IP address