Sun Nov 20, 2011 9:41 pm
Hi Reza
If you want to put AP outside the building to cover interior, this aprroach is not good becouse walls and windows will prevent you to get goot signal coverage inside.
I would do it by installing multiple access points inside. Number of devices depends on signal propagation inside (what walls are made from etc)
Ideally would be to get ethernet connection to back side on each AP, if that is not technically possible then I would use a Double radio devices and mesh them toghether.
If floor.ceiling is too think to bypass signal and that will prevent you to mesh netowrk also a good approach is to use those Ethernet Over Powerline devices