Hello,

In this forum there exist two other topic with this problem, but I think was better to do this new topic trying to join all the problematic.

The other posts are:
http://forum.mikrotik.com/viewtopic.php?f=7&t=48627
http://forum.mikrotik.com/viewtopic.php?f=7&t=55528

In this link - http://wiki.mikrotik.com/wiki/802.1q_Tr ... s_P2P_Link - you can see all a solution to pass a VLAN Trunk over Wireless. But they use one WDS Wireless link per VLAN, so they have 3 VLAN's and they create 3 WDS Links and 3 VAP's.


I'm questioning is:
Is possible to have de 3 VLAN's passing in the same WDS link?

So I'm facing the same problem as describe in other posts wear, different VLAN's but the same scenario.
VAP1: VLAN 101 -> Station A
VAP1: VLAN 102-> Station A
VAP2: VLAN 202 -> Station B

I Have put 1 VLAN in a WDS link with no problems...
But is someone able to put 2 VLAN's in the same WDS link. I also need two VLANs over one WDS link using the same VAP.

Can someone help me with advises, opinions, something....

Thanks in advanced.
Regards,
Craig Davids

Maybe this will help you, http://forum.mikrotik.com/viewtopic.php?f=13&t=57492

Just try to add /interface vlan on the wds interface on both sides - and bridge them with your vlans from ethernet .

why dont u just bridge the eth0 interface with wds link? And on the other side u tag the wanted vlan?
Looks more easy!

if you know ethernet , maybe this help - Bridge in mikrotik its just a HUB (sending all to all)