Community discussions

MikroTik App
 
wifi442
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 83
Joined: Tue Jan 12, 2010 11:01 pm

NV2 vs Noise

Sat Dec 31, 2011 10:17 pm

I am getting ready to set up new links soon. They are links up to a tower site with lots of noise. I currently run a Ubnt Rocket M2 and also another rocket M5 Link with the rocket dishes up to this tower.

I am moving office locations and am considering swapping the radios to UBTIK's in place of the rockets during the move :)

The tower side is pretty noisy on both bands. How does NV2 hold up in noisy situations? I'm hoping to gain a little bit of throughput if possible. Distance is 7 Miles/ 11km
 
chadd
Member
Member
Posts: 348
Joined: Fri Dec 31, 2004 2:40 am

Re: NV2 vs Noise

Sat Dec 31, 2011 10:32 pm

I am getting ready to set up new links soon. They are links up to a tower site with lots of noise. I currently run a Ubnt Rocket M2 and also another rocket M5 Link with the rocket dishes up to this tower.

I am moving office locations and am considering swapping the radios to UBTIK's in place of the rockets during the move :)

The tower side is pretty noisy on both bands. How does NV2 hold up in noisy situations? I'm hoping to gain a little bit of throughput if possible. Distance is 7 Miles/ 11km
It is just like Airmax, if you have enough SNR it will work great. From my experience you need ~20-30dB SNR to get it to work really well. I have seen better throughput with NV2 than Airmax in similar conditions.

Chadd
 
wifi442
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 83
Joined: Tue Jan 12, 2010 11:01 pm

Re: NV2 vs Noise

Sun Jan 01, 2012 3:18 am

Chadd,

Thanks for the reply. I keep hearing about how awesome NV2 is. I've tested a few links indoors at the office. If definitely looks promising! I really want to give it a try in the field.
 
chadd
Member
Member
Posts: 348
Joined: Fri Dec 31, 2004 2:40 am

Re: NV2 vs Noise

Sun Jan 01, 2012 6:21 am

Chadd,

Thanks for the reply. I keep hearing about how awesome NV2 is. I've tested a few links indoors at the office. If definitely looks promising! I really want to give it a try in the field.
Yep in the right conditions it is pretty amazing.

Chadd
 
n21roadie
Forum Guru
Forum Guru
Posts: 1949
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: NV2 vs Noise

Sun Jan 01, 2012 7:32 pm

I am getting ready to set up new links soon. They are links up to a tower site with lots of noise. I currently run a Ubnt Rocket M2 and also another rocket M5 Link with the rocket dishes up to this tower.

I am moving office locations and am considering swapping the radios to UBTIK's in place of the rockets during the move :)

The tower side is pretty noisy on both bands. How does NV2 hold up in noisy situations? I'm hoping to gain a little bit of throughput if possible. Distance is 7 Miles/ 11km
If there is lots of noise be prepared to spend time setting up your antenna's, co-location noise rejection and placement is critical on the mast for each antenna to use NV2 otherwise you could experience regular disconnects,
http://forum.mikrotik.com/viewtopic.php?f=7&t=49835