Optimal Wireless Settings 5ghz MT PTP 433ah, R52HN, 2' Dish
Posted: Fri Jan 06, 2012 8:27 am
I know some of you will probably say that I need to find a more clear fresnel zone and I agree with you. My main reason for this post is to discover any additional tweaks I can do for optimal performance for a 5ghz backhaul and 5ghz AP.
Regarding security profiles I know now to use aes, rather than tkip because tkip uses too much CPU. If thats not true please let me know.
Regarding MT 5ghz dual pole 30db rocketdish with 433ah, r52hn PTP's for backhauls:
These are my settings for my wlan1. If the tab is not included in the screenshot it is because the settings are default. If there are any settings that I can adjust please let me know.
I have read the wireless settings WIKI but not sure what settings WISPS are using in the real world that have actually made an improvement.
Please help so I can tweak all of my backhauls for maximum performance.
_____________________________________________________________
Would these settings be different if this were a MT AP PTMP, rather than a PTP? Would a UBNT CPE(Nanobridge 5 25) be able to connect to this AP as well?
Thank you all in advance!
Regarding security profiles I know now to use aes, rather than tkip because tkip uses too much CPU. If thats not true please let me know.
Regarding MT 5ghz dual pole 30db rocketdish with 433ah, r52hn PTP's for backhauls:
These are my settings for my wlan1. If the tab is not included in the screenshot it is because the settings are default. If there are any settings that I can adjust please let me know.
I have read the wireless settings WIKI but not sure what settings WISPS are using in the real world that have actually made an improvement.
Please help so I can tweak all of my backhauls for maximum performance.
_____________________________________________________________
Would these settings be different if this were a MT AP PTMP, rather than a PTP? Would a UBNT CPE(Nanobridge 5 25) be able to connect to this AP as well?
Thank you all in advance!