Page 1 of 1
trouble with r52hn+2 sectore
Posted: Wed Jan 11, 2012 9:00 am
by vahid023
hi
i am using rb433ah+one r52hn(2.4ghz)+2 sectore antenna for chain1 and 2
when only one chain is active all thing is good. ( ccq & throughput )
but when second chain being active too then ccq & throughput goes down ( very low )
i have a virtual ap on this interface.
whats the problem?
Re: trouble with r52hn+2 sectore
Posted: Wed Jan 11, 2012 1:13 pm
by InoX
try to put the antennas inline, one up and one down, not paralel. Maybe some more details...
Re: trouble with r52hn+2 sectore
Posted: Wed Jan 11, 2012 2:08 pm
by server8
Same frequency and same polarization try to change polarization on one antenna, split vertically is a good idea but I thinks it's not enough.
Giuseppe
Re: trouble with r52hn+2 sectore
Posted: Wed Jan 11, 2012 10:17 pm
by vahid023
both of antenna are vertical and each is for one direction.
i use this senario for more coverage
please help me
Re: trouble with r52hn+2 sectore
Posted: Wed Jan 11, 2012 10:22 pm
by vahid023
Same frequency and same polarization try to change polarization on one antenna, split vertically is a good idea but I thinks it's not enough.
Giuseppe
how can i change polarization of sectore antenna? by replace one antenna with a horizantal one? or changing in installation metod?
Re: trouble with r52hn+2 sectore
Posted: Wed Jan 11, 2012 11:56 pm
by server8
Replacing one antenna with H polarized antenna like this one
http://www.interprojekt.com.pl/tetraant ... p-758.html
Giuseppe