MikroTik

Posted: **Wed Jan 25, 2012 12:46 pm**

Hi,
I have problem with my RB711-5Hn , at log I see:

"00:0C:42:F0:7E:21 failed to join recently
no network that satisfies connect-list, by default choose with strongest signal
failed to select network"

Can enyone help me with that ?

Posted: **Wed Jan 25, 2012 1:50 pm**

connect-list on "CPE side" isn't the correct MAC of the "AP side"

Posted: **Wed Jan 25, 2012 2:22 pm**

But there on AP side I have default-authenticate=yes

Posted: **Wed Jan 25, 2012 2:28 pm**

access list is to give access to this AP, or.. not necessary if you have default autentication=yes.. like you have

BUT

if you have a MAC address in your connect list (connect list of the CPE), you are saying to your "CPE" that only is able to connect to this MAC. Then, if you want to connect to another MAC, add this MAC to the connect list or delete all MACs.

Leave all disabled in your connect list (CPE side) or add the MAC address of your AP.

Posted: **Fri Apr 20, 2012 9:56 pm**

Hi,

i have the same problem, but the Connect List is empty.
What can i do?

The Failure-Log:

20:42:06 wireless,info 00:0C:42:FE:26:6F@wlan1-gateway: lost connection, not polle
d for too long 
20:42:10 wireless,debug wlan1-gateway: must select network 
20:42:10 wireless,debug 00:0C:42:39:9D:55: on 5320 AP: yes SSID WLAN-1 caps 0
x421 rates 0xff00 basic 0x100 MT: yes 
20:42:10 wireless,debug 7C:4F:B5:D2:E2:82: on 5240 AP: yes SSID WLAN-2 caps 0
x11 rates 0xff00 basic 0x1500 MT: no 
20:42:10 wireless,debug wlan1-gateway: no network that satisfies connect-list,  by
 default choose with strongest signal 
20:42:10 wireless,debug wlan1-gateway: failed to select network 
20:42:13 wireless,debug wlan1-gateway: must select network 
20:42:13 wireless,debug 00:0C:42:39:9D:55: on 5320 AP: yes SSID WLAN-1 caps 0
x421 rates 0xff00 basic 0x100 MT: yes 
20:42:13 wireless,debug 7C:4F:B5:D2:E2:82: on 5240 AP: yes SSID WLAN-2 caps 0
x11 rates 0xff00 basic 0x1500 MT: no 
20:42:13 wireless,debug wlan1-gateway: no network that satisfies connect-list,  by
 default choose with strongest signal 
20:42:13 wireless,debug wlan1-gateway: failed to select network 
20:42:16 wireless,debug wlan1-gateway: must select network 
20:42:16 wireless,debug 00:0C:42:39:9D:55: on 5320 AP: yes SSID WLAN-1 caps 0
x421 rates 0xff00 basic 0x100 MT: yes 
20:42:16 wireless,debug 7C:4F:B5:D2:E2:82: on 5240 AP: yes SSID WLAN-2 caps 0
x11 rates 0xff00 basic 0x1500 MT: no 
20:42:16 wireless,debug wlan1-gateway: no network that satisfies connect-list,  by
 default choose with strongest signal 
20:42:16 wireless,debug wlan1-gateway: failed to select network 
20:42:19 wireless,debug wlan1-gateway: must select network 
20:42:19 wireless,debug 00:0C:42:39:9D:55: on 5320 AP: yes SSID WLAN-1 caps 0
x421 rates 0xff00 basic 0x100 MT: yes 
20:42:19 wireless,debug 7C:4F:B5:D2:E2:82: on 5240 AP: yes SSID WLAN-2 caps 0
x11 rates 0xff00 basic 0x1500 MT: no 
20:42:19 wireless,debug 00:0C:42:FE:26:6F: on 5180 AP: yes SSID WLAN-3 caps 0x421 r
ates 0xff00 basic 0x100 MT: yes 
20:42:19 wireless,debug wlan1-gateway: no network that satisfies connect-list,  by
 default choose with strongest signal 
20:42:19 wireless,info 00:0C:42:FE:26:6F@wlan1-gateway established connection on 5
180, SSID WLAN-3

The Problem came 5 to 15 over the day. The Link is 5 KM with -72 dbm with 90% CCQ. Any Ideas?

Posted: **Fri Apr 27, 2012 10:03 am**

Where can help?
I have increase the hw-retries to 15 but the same problem.
I have set the Signal in the Connect-List but the same problem.
The Log-Failure came with NV2 too.

Anyone Ideas?

MikroTik

RB711-5Hn problems

RB711-5Hn problems

Re: RB711-5Hn problems

Re: RB711-5Hn problems

Re: RB711-5Hn problems

Re: RB711-5Hn problems

Re: RB711-5Hn problems