Re: ip
so, what's problem?.. you can create any number of addresses per interface
-
-
javedshotline
newbie
- Posts: 26
- Joined:
Re: ip
you can assign multiple ip addresses to same interfaces.
here is example
& u can use any address from these subnets to assign to any device which is connected to ether1
here is example
Code: Select all
/ip address
add address=192.168.1.1/24 interface=ether1
add address=192.168.2.1/24 interface=ether1
add address=192.168.3.1/24 interface=ether1
Last edited by javedshotline on Sun Feb 12, 2012 10:40 am, edited 1 time in total.
-
-
cybercoder
Member Candidate
- Posts: 175
- Joined:
- Location: Guilan, Iran
- Contact:
Re: ip
there is not possible to assign same IP Addresses to more than 1 interface
You can bridge that interfaces and assign a unique IP Address on the bridge
But remember the bridge will allow bypass bidirectional traffic on all interfaces, normally.
You can bridge that interfaces and assign a unique IP Address on the bridge
But remember the bridge will allow bypass bidirectional traffic on all interfaces, normally.
Re: ip
just use /32 mask instead of /24ok thanks but how to create this adreses with only one port for example 192.168.2.1 not 192.168.2.2.3.4.5 etc.thanks
but why do you need it?
Re: ip
I don't think anybody really understood the original question. Including me
tech2 clarify with full detail what you want, and what is the issue now
tech2 clarify with full detail what you want, and what is the issue now
-
-
javedshotline
newbie
- Posts: 26
- Joined:
Re: ip
still can't understand your question 
explain briefly what u really want to do? then maybe some1 help u
explain briefly what u really want to do? then maybe some1 help u
-
-
cybercoder
Member Candidate
- Posts: 175
- Joined:
- Location: Guilan, Iran
- Contact:
Re: ip
if i understood, you want to assign 192.168.254 to the interface which connected to 192.168.1.1 but you want 192.168.1.2-253 be not in your subnet mask? i understand correctly?i want to create ip with only one port not 254 and i have gateway with 192.168.1.1 how to make 192.168.1.254.thanks
Re: ip
hinot with 254 ip but with one ip you understand me ? i have gateway 192.168.1.1 how i can create other gateway 192.168.1.254 i not can create ip for ex
192.168.1.1
255.255.255.0
192.168.1.1 because gateway is with 1 in end.
thanks for understand
perhaps you need subnetmask 255.255.255.252 ?!? (/30)
This is Addressrage 192.168.1.0 - 192.168.1.3 (its 2 usable Addresses)
-
-
TheWiFiGuy
Member
- Posts: 351
- Joined:
- Location: UK
ip
And?
Simply set the device ip address to that and if using Dhcp make sure that .254 is not in the scope
Simply set the device ip address to that and if using Dhcp make sure that .254 is not in the scope
Re: ip
we need screenshots! no one understands you!i create ip adres but gateway is 1 not 254 i want to change
Re: ip
I once had a wise professor that gave 5 points for each problem if you draw just a simple picture.
The exam had 4 or 5 problems, so you could easily get 20~25 points. Just make a picture.
It was amazing how many students got less than 20 points. (100 is perfect)
Draw a picture. It tells 1,000 words and gets you 5 points.
It doesn't need to be pretty.
The exam had 4 or 5 problems, so you could easily get 20~25 points. Just make a picture.
It was amazing how many students got less than 20 points. (100 is perfect)
Draw a picture. It tells 1,000 words and gets you 5 points.
It doesn't need to be pretty.
Who is online
Users browsing this forum: itimo01 and 29 guests