ip
Posted: Sun Feb 05, 2012 12:35 am
hello can tell me anyone how to create ip adres with only one port for e.x because i have 3 ip adreses for 3 sectors in rb 433 how to create separate ip adres i have 192.168.1 and 2.3 etc.thanks
Page 1 of 1
Re: ip
Posted: Wed Feb 08, 2012 5:44 pm
so, what's problem?.. you can create any number of addresses per interface
Re: ip
Posted: Thu Feb 09, 2012 10:56 pm
you can assign multiple ip addresses to same interfaces.
here is example
& u can use any address from these subnets to assign to any device which is connected to ether1
here is example
Code: Select all
/ip address
add address=192.168.1.1/24 interface=ether1
add address=192.168.2.1/24 interface=ether1
add address=192.168.3.1/24 interface=ether1
Re: ip
Posted: Fri Feb 10, 2012 10:03 am
ok thanks but how to create this adreses with only one port for example 192.168.2.1 not 192.168.2.2.3.4.5 etc.thanks
Re: ip
Posted: Fri Feb 10, 2012 10:40 am
there is not possible to assign same IP Addresses to more than 1 interface
You can bridge that interfaces and assign a unique IP Address on the bridge
But remember the bridge will allow bypass bidirectional traffic on all interfaces, normally.
You can bridge that interfaces and assign a unique IP Address on the bridge
But remember the bridge will allow bypass bidirectional traffic on all interfaces, normally.
Re: ip
Posted: Fri Feb 10, 2012 11:36 am
just use /32 mask instead of /24ok thanks but how to create this adreses with only one port for example 192.168.2.1 not 192.168.2.2.3.4.5 etc.thanks
but why do you need it?
Re: ip
Posted: Fri Feb 10, 2012 11:38 am
I don't think anybody really understood the original question. Including me
tech2 clarify with full detail what you want, and what is the issue now
tech2 clarify with full detail what you want, and what is the issue now
Re: ip
Posted: Fri Feb 10, 2012 7:31 pm
i want to create ip with only one port not 254 and i have gateway with 192.168.1.1 how to make 192.168.1.254.thanks
Re: ip
Posted: Fri Feb 10, 2012 10:35 pm
still can't understand your question 
explain briefly what u really want to do? then maybe some1 help u
explain briefly what u really want to do? then maybe some1 help u
Re: ip
Posted: Sat Feb 11, 2012 1:54 pm
if i understood, you want to assign 192.168.254 to the interface which connected to 192.168.1.1 but you want 192.168.1.2-253 be not in your subnet mask? i understand correctly?i want to create ip with only one port not 254 and i have gateway with 192.168.1.1 how to make 192.168.1.254.thanks
Re: ip
Posted: Sun Feb 19, 2012 3:26 pm
tech2
Just explain this "ip address with one port"?
Just explain this "ip address with one port"?
Re: ip
Posted: Sat Mar 03, 2012 3:22 pm
not with 254 ip but with one ip you understand me ? i have gateway 192.168.1.1 how i can create other gateway 192.168.1.254 i not can create ip for ex
192.168.1.1
255.255.255.0
192.168.1.1 because gateway is with 1 in end.
thanks for understand
192.168.1.1
255.255.255.0
192.168.1.1 because gateway is with 1 in end.
thanks for understand
Re: ip
Posted: Mon Mar 05, 2012 5:43 pm
hinot with 254 ip but with one ip you understand me ? i have gateway 192.168.1.1 how i can create other gateway 192.168.1.254 i not can create ip for ex
192.168.1.1
255.255.255.0
192.168.1.1 because gateway is with 1 in end.
thanks for understand
perhaps you need subnetmask 255.255.255.252 ?!? (/30)
This is Addressrage 192.168.1.0 - 192.168.1.3 (its 2 usable Addresses)
Re: ip
Posted: Thu Mar 15, 2012 11:08 pm
I want to create an gateway that ends with a 254 not with 1 for example 192.168.1.1 but 192.168.1.254 not possibly understand me now?...
ip
Posted: Thu Mar 15, 2012 11:46 pm
And?
Simply set the device ip address to that and if using Dhcp make sure that .254 is not in the scope
Simply set the device ip address to that and if using Dhcp make sure that .254 is not in the scope
Re: ip
Posted: Fri Mar 23, 2012 11:43 am
i create ip adres but gateway is 1 not 254 i want to change
Re: ip
Posted: Fri Mar 23, 2012 1:47 pm
we need screenshots! no one understands you!i create ip adres but gateway is 1 not 254 i want to change
Re: ip
Posted: Sat Mar 24, 2012 8:41 am
I once had a wise professor that gave 5 points for each problem if you draw just a simple picture.
The exam had 4 or 5 problems, so you could easily get 20~25 points. Just make a picture.
It was amazing how many students got less than 20 points. (100 is perfect)
Draw a picture. It tells 1,000 words and gets you 5 points.
It doesn't need to be pretty.
The exam had 4 or 5 problems, so you could easily get 20~25 points. Just make a picture.
It was amazing how many students got less than 20 points. (100 is perfect)
Draw a picture. It tells 1,000 words and gets you 5 points.
It doesn't need to be pretty.