Page 1 of 1
Evry Day Kernel Failure?
Posted: Sat Feb 25, 2012 7:38 pm
by Lakis
kernel panik.png
after upgrade from 5.9 to 5.13
RB800 reboot 4-5 times a day
than downgrade to 5.12 but same
Any Help?
Tnx
Re: Evry Day Kernel Failure?
Posted: Sat Feb 25, 2012 8:04 pm
by jcem
Hi!
Do you use bridge?
If so activate rstp on each bridge....
RGDS
Re: Evry Day Kernel Failure?
Posted: Mon Feb 27, 2012 5:54 pm
by dejanb
kernel panik.png
after upgrade from 5.9 to 5.13
RB800 reboot 4-5 times a day
than downgrade to 5.12 but same
Any Help?
Tnx
Hello!
Do you have multi-CPU enabled? if so, try to disable!
I had same problem until i disabled multi-cpu support!
Regards!
Re: Evry Day Kernel Failure?
Posted: Mon Feb 27, 2012 9:20 pm
by honzam
what routerboot?
/system routerboard print
Re: Evry Day Kernel Failure?
Posted: Tue Feb 28, 2012 12:43 am
by dejanb
Hello!
Sorry, my mistake xD
I didn't saw that you are using RB800, i had same problem, but on x86 Dual Core system.
Regards!
Re: Evry Day Kernel Failure?
Posted: Tue Feb 28, 2012 1:13 am
by Lakis
Yes with multi core PC I was having long time ago kernel problem but I m using RB800 just for p2p Link
no special config just AP bridge<->Station WDS no firewall...
today I upgrade to 5.14 this show up bad-blocks: 0.1% (if this is the case but I m not shure)..
Re: Evry Day Kernel Failure?
Posted: Thu Mar 01, 2012 7:41 am
by cearnshaw
All my x-86 dual-core machines have problem with 5.x. One machine runs fine on 5.12 now, but another machine of same type will not. I put it back to 5.6 and it ran for ten days, then locked up. Had to power it down to fix it. This is very frustrating. I've been using Mikrotik since somewhere around 2002 and have been a big supporter, but lately between this and RB450G capacitor problems I am afraid I am going to start losing my customers. I wish they would be more careful with the products/versions they release. Seems like every O/S release fixes something and breaks something else. And now there is talk of V6.x? Crazy!!!