Page 1 of 1
How-To remote manage RB751U-2HnD through WebFig
Posted: Tue Feb 28, 2012 6:00 pm
by tzupan
Hi!
I'm new in the MT world and setup my router successfully
I have just tvo questions:
1st: default router IP is set-up to 192.168.88.1 - how to change it to custom?
2nd: how to remotely access to my router at fixed IP through internet?
Thanks!
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 6:55 pm
by nickshore
1) go to IP -> addresses and change it
note that you will probably need to change the dhcp server and ip pools as well
2) www, winbox or ssh to the public IP
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 7:00 pm
by tzupan
Sorry but if i try to connect to my public ip nothing happen.
Need to change something in configuration?
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 10:36 pm
by cybercoder
open new terminal and run this command:
then mark all result in the window and right click and copy, then paste them here
we will see what is your router configuration and how it should edit and fix
good luck
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 10:43 pm
by tzupan
MMM MMM KKK TTTTTTTTTTT KKK
MMMM MMMM KKK TTTTTTTTTTT KKK
MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK
MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK
MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK
MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK
MikroTik RouterOS 5.6 (c) 1999-2011 http://www.mikrotik.com/
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 10:53 pm
by cybercoder
I copied the configuration and i'm reading, please delete the above post because of your security reasons
good luck
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 10:57 pm
by cybercoder
please send output of
command too
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 10:59 pm
by tzupan
MMM MMM KKK TTTTTTTTTTT KKK
MMMM MMMM KKK TTTTTTTTTTT KKK
MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK
MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK
MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK
MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK
MikroTik RouterOS 5.6 (c) 1999-2011 http://www.mikrotik.com/
[tzupan@MikroTik RB751 (Zupan)] > /ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
[tzupan@MikroTik RB751 (Zupan)] >
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:04 pm
by cybercoder
and last step :
there should be an address with D (dynamic) flag because of DHCP Client
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:06 pm
by tzupan
and last step :
there should be an address with D (dynamic) flag because of DHCP Client
[tzupan@MikroTik RB751 (Zupan)] > /ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
0 ;;; default configuration
192.168.88.1/24 192.168.88.0 bridge-local
[tzupan@MikroTik RB751 (Zupan)] >
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:16 pm
by cybercoder
ok ok i found
your firewall now just allow the established connection from the world this means bidirectional connection will start when request just started from your lan
enter this codes in terminal:
/ip firewall filter
add action=accept chain=input disabled=no dst-port=22 protocol=tcp place-before=3
add action=accept chain=input disabled=no dst-port=80 protocol=tcp place-before=3
add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=3
This rules will open only http and ssh and winbox ports of your router to the world.
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:17 pm
by cybercoder
please remove the IP addresses you wrote because of your security reasons.
good luck and don't forget the karma
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:21 pm
by cybercoder
i forgot the winbox and i added it's port to that post
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:26 pm
by cybercoder
yes, i opened your router's web page from home
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:29 pm
by tzupan
yes, i opened your router's web page from home
I know
Thanks a lot my friend
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:31 pm
by cybercoder
you're welcome
don't forget to give karma
and secure your router for attacks.
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:42 pm
by tzupan
you're welcome
don't forget to give karma
and secure your router for attacks.
Did you see our karma?
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 29, 2012 11:53 pm
by cybercoder
i added the winbox access rule to that post
and thanx for the karma, friend
good luck
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Fri Sep 06, 2013 7:17 pm
by evit
i added the winbox access rule to that post
and thanx for the karma, friend
good luck
Hi, i have the same problem , i cant remove my mikrotik using my public IP, can you help?
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Tue Mar 22, 2016 9:42 pm
by morgan87
Having the same problem. How do i access winbox or webfig away from my home network or physical network of the MT router. Please help been trying for days.
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Wed Feb 22, 2017 9:46 am
by AbuYousuf
Hi!
I'm new in the MT world and setup my router successfully
I have just tvo questions:
1st: default router IP is set-up to 192.169.222.30-
2nd: how to remotely access to my router at fixed IP through internet anywhere?
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Fri Feb 24, 2017 10:29 am
by erlinden
For remote purposes I would always prefer using a VPN. It gives additional security and can be user for multiple purposes.
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Tue Aug 22, 2017 6:19 pm
by brunoeco
For remote purposes I would always prefer using a VPN. It gives additional security and can be user for multiple purposes.
Hi! Can you demonstrate how setup this VPN ?
Re: How-To remote manage RB751U-2HnD through WebFig
Posted: Sat Aug 26, 2017 10:27 am
by erlinden