Page 1 of 1
mac telnet from windows
Posted: Sun Dec 18, 2005 10:45 am
by neeraj_k
Hi,
How can I mac-telnet from a windows pc ? I tried using neighbourviewer.exe but it fails to connect whereas thru routeros It can be done.
thnx
Posted: Mon Dec 19, 2005 8:51 am
by schorsch
Posted: Mon Dec 19, 2005 10:06 am
by neeraj_k
Hi,
Please read the post I had stated neighbourviewer fails to connect. It shows the link but doesn't connect.
thnx
Posted: Tue Dec 20, 2005 2:16 am
by cibernet
Check Netbios support over tcp/ip on the ethernet, and if you try to connect through a wireless link, the link must be transparent
Posted: Tue Dec 20, 2005 2:36 am
by in4ni
Have you tried clicking on the ... just to the right of the "connect to" window in winbox? Also make sure you only have one network interface enabled on your windows machine. Hope this helps
Posted: Wed Dec 21, 2005 6:45 am
by neeraj_k
I'm using windows xp. Where is netbios over tcp/ip protocols.
thnx
Posted: Wed Dec 21, 2005 7:09 am
by cibernet
I'm using windows xp. Where is netbios over tcp/ip protocols.
thnx
You can check it on advanced->WINS tab in the ethernet adapter under TPC/IP internet protocol
Posted: Wed Dec 21, 2005 8:09 am
by wildbill442
What does NETBIOS a session layer protocol have to do with MAC-Telnet that operates at Layer 2?
If you have winbox.exe on your laptop/pc and are on the same segment as the mikrotik router, open winbox click the "..." button next to the "Connect to:" field and it should show the IP and MAC address of the mikrotik device. As well as the device name. You should then be able to select that device and login via MAC-winbox.
The neighbor viewer works the same way just be connected to the same segment. Also make sure any software firewalls you have are properly configured or disabled when you use this program.
Not completely unknown...
Posted: Wed Dec 21, 2005 8:47 am
by joeri91942
I have the exact same behavior, on three different WinXP boxes against two MT (RB500 / 2.9.7) boxes... have contacted MT about this and got the reply "It works"
When I replied that I was willing to allow them to remote control one of my machines to see for themselfs I got the reply "It works"
So I guess this is the way it is supposed to work...
Best regards
/Jörgen
Posted: Wed Dec 21, 2005 8:59 am
by cibernet
What does NETBIOS a session layer protocol have to do with MAC-Telnet that operates at Layer 2?
If you have winbox.exe on your laptop/pc and are on the same segment as the mikrotik router, open winbox click the "..." button next to the "Connect to:" field and it should show the IP and MAC address of the mikrotik device. As well as the device name. You should then be able to select that device and login via MAC-winbox.
The neighbor viewer works the same way just be connected to the same segment. Also make sure any software firewalls you have are properly configured or disabled when you use this program.
Nothing, but, try it yourself... disable it and try to connect... perhaps it´s a win2k issue. I don´t know, i´m just telling what happened in my paticular case. If mt guys can confirm this... maybe i´m wrong, but i´m just trying to help, that´s all
Posted: Wed Dec 21, 2005 12:22 pm
by tully
You have to have the terminal program in the same folder I think. You can also just run the terminal program for the command line.
John
Re: mac telnet from windows
Posted: Mon Feb 26, 2018 3:34 pm
by kevin1411
Thanx for providing the detail to fix the error. if u still unable to fix the error, please follow the link to quickly fix the error with few easy step.
https://techfries.co/install-telnet-client/