MikroTik

Can the dev's please look at adding support for option 60 in the dhcp client module of RouterOS

The description for this is over here http://www.ietf.org/rfc/rfc3925.txt

Some ISP's allow and/or require sending the DHCP request with at least Option 60 specified and also possibly Option 61 before giving the client an IP, This is an alternative to PPPoE for some IPS's

Cisco describes the feature here http://www.cisco.com/en/US/docs/ios/12_ ... hcpcf.html

Also see forum posts:
http://forum.mikrotik.com/viewtopic.php?f=2&t=46855
http://forum.mikrotik.com/viewtopic.php?f=2&t=60122

This would be a great option if for example you have phones and computers on the same physical network. (Collision domain) 00:08:5D (phone) could be defined as a separate subnet via DHCP from the computers. This allowing the computers to be restricted on bandwidth to ensure QOS for the phones via a simple Queue.

Having the ability to designate MAC XX:XX:XX or define by vendor type would be a great way to overcome certain issues with customer networks that are inherited at installation time.