Hi All

i'm trying to write script to add simple queue for each active user in PPP active with no success till now , the target is :

i have 4 service levels each level have difrent up / down limit and the required sicript is to add new simple queue once the client be active on PPP active .

Any help is highly appreciated .


Thanks

try this script
change max-limit (upload/download)

You can use RADIUS server or UserManager to reply with bandwidth limit attributes.

i tried it but its didn't add any simple queue when the ppp user logged in as active user

try this script

Code: Select all

foreach pppuser in=[/ppp active find ] do={
local ip [/ppp active get $pppuser address ]
local name [/ppp active get $pppuser name]
foreach queue in=[/queue simple find] do={
local tmp [/queue simple get $queue target-addresses]
if ($ip!=$tmp) do={queue simple add name=$name target-addresses=$ip max-limit=256k/512k
}}}

change max-limit (upload/download)

what version is runing in your routerboard??

paste in the terminal and read the output


I tested in 5.15 and work fine

i tried 5.12 and 5.16 ,, i believe that there is no difference ..

when u test it is is totall same just copy and past into the script and run the script ??

what version is runing in your routerboard??

paste in the terminal and read the output


I tested in 5.15 and work fine

copy and paste in the terminal.

do we need to modify the lines in red ,,bellow code

local ip [/ppp active get $pppuser address ]
local tmp [/queue simple get $queue target-addresses]
if ($ip!=$tmp) do={queue simple add name=$name target-addresses=$ip max-limit=256k/512k

try this script

Code: Select all

foreach pppuser in=[/ppp active find ] do={
local ip [/ppp active get [color=#FF0000]$pppuser address[/color] ]
local name [/ppp active get $pppuser name]
foreach queue in=[/queue simple find] do={
local tmp [/queue simple get [color=#FF0000]$queue target-addresses[/color]]
if ($ip!=$tmp) do={queue simple add name=[color=#FF0000]$name[/color] target-addresses=[color=#FF0000]$ip[/color] max-limit=256k/512k
}}}

change max-limit (upload/download)

its work for me , but if i have diffident service level , any idea how to create script for each service level ?

try this script

Code: Select all

foreach pppuser in=[/ppp active find ] do={
local ip [/ppp active get $pppuser address ]
local name [/ppp active get $pppuser name]
foreach queue in=[/queue simple find] do={
local tmp [/queue simple get $queue target-addresses]
if ($ip!=$tmp) do={queue simple add name=$name target-addresses=$ip max-limit=256k/512k
}}}

change max-limit (upload/download)